Jig

• 

Introduction
Jig concentrators are devices mainly used in the mining industry for mineral processing, to separate particles within the ore body, based on their specific gravity (relative density). The particles should be in similar size. And Jig is mainly used to handle placer gold, tungsten, tin, hematite and beach placer.

Features
Sawtooth wave jig is revised and manufactured, based on the stratified theory and the adequate analysis of other conventional jigs. The jigging pulsation curve----produced by sawtooth wave jig----is in the shape of sawtooth wave which makes upward water flow quicker than downward water flow.
The feature that upward time is shorter than downward time solves the problem that time and action of upward/downward water flows. This breakthrough dramatically amplifies the loose degree and mitigates suction action, which facilitates precipitation of coarse ores and improves ore recovery rate.

Application
Jig is mainly used to handle placer gold, tungsten, tin, hematite and beach placer.

Working principle
The particles are introduced to the jig bed (usually a screen) where they are thrust upward by a pulsing water column or body, resulting in the particles being suspended within the water. As the pulse dissipates, the water level returns to its lower starting position and the particles once again settle on the jig bed. As the particles are exposed to gravitational energy whilst in suspension within the water, those with a higher specific gravity (density) settle faster than those with a lower count, resulting in a concentration of material with higher density at the bottom, on the jig bed. The particles are now concentrated according to density and can be extracted from the jig bed separately.

Technical parameters

Type Model Length×width(mm) Jigging
chamber area(m2) The number of general jigging
chamber General
area
of jigging
chamber
(m2) Stroke
coefficient
Lateral driven LTP-34/2 450×300 0.135 2 0.27 0.58
Bottom driven LTA-55/2 500×500 0.25 0.5 0.5
LTA-1010/2 1000×1000 1 2
Re-vibrating
Side driven LTC-69/2 900×600 0.54 1.08 0.56
2LTC-79/4 900×700 0.63 4 2.52 0.48
2LTC-912/4 1200×900 1.08 4.32 0.49
2LTC-366/8T 600×(300～600) 0.2～0.34 8 2.16 0.68～0.40
2LTC-6109/8T 900×(600～1000) 0.58～0.86 5.76 0.52～0.35

Type Model Diaphragm
stroke Diaphragm The
maximum
Feed
size(mm) Processing
capacity (t/h ) Water
consumption(t/h) Motor
power(kw) Weight(kg)
Lateral driven LTP-34/2 0～25 320; 420 12 2～6 4～10 1.1 750
Bottom driven LTA-55/2 0～26 250;300;350 5 1～5 4～20 1047
LTA-1010/2 0～25 250;300;350 5～15 20～60 22 1516
Re-vibrating 0～5 400～750 2～10 4～5 40～45 1.7 1620
Side driven LTC-69/2 0～50 220～350 12 6～9 40～60 15 1420
2LTC-79/4 160～250 5～15 20～90 22 2450
2LTC-912/4 160-250 7～25 60～120 3 3500
2LTC-366/8T 120～300 5 3～6 20～40 1.1×2 1600
2LTC-6109/8T 10～20 80～120 2.2×2 4650

Other supplier products

	Xinhai abrasion resistant rubber	Introduction The rubber----which is manufactured with the wet production technology in the state of liquid phrase----is not subject to damages cau...
	Dual impeller agitating tank	Introduction Dual impeller high efficiency agitating tank is applicable to carbon process and rubber chemical process. Its upper and lower layer o...
	Electromagnetic iron remover	Introduction Electromagnetic iron remover is custom designed for the removal of tramp iron from magnetic material like iron ore, sinter ore, pelle...
	Dry magnetic separator	Introduction Magnetic separation is a process in which magnetically susceptible material is extracted from a mixture using a magnetic force. Dry m...
	High efficiency agitating tank	Introduction High efficiency agitating tank is used for the pulp stirring before the flotation operations, make the pulp fully mixed with the phar...

Same products

	Preform Mould	Seller: Taizhou Qihong Mold Co., Ltd.	Taizhou Qihong Mold Co., Ltd. specializes in developing and manufacturing Preform Mould solutions...
	Gear Pump	Seller: 865985	Xianju Liming Machinery Co., Ltd. manufactures high-pressure and displacement Gear Pumps for cons...
	KL‑113 Auto‑calibrating pH/Thermometer	Seller: Kelilong Electron Co.Ltd	Product Description: Large‑screen display, high precision and high resolution for ea...
	Automatic Anchoring Agent Filling Equipment	Seller: Hebei Pengkai Machinery Equipment Manufacturing Co., Ltd	PK series high efficiency resin anchor agent automation production line is a mainstream product o...
	Cutting disc	Seller: O&K GROUP LIMITED	Looking for Quality Products? From electronics to home essentials, fashion to industrial supplie...