Compression resistance tester for textiles

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Application

The G5 Compression Tester is suitable for:

Fibers and Textiles: Compression comfort testing of underwear, bedding, and apparel fabrics

Rubber and Foam Materials: Footwear soles, seat cushions, packaging materials

Bedding Products: Evaluation of compression and recovery of mattresses, pillows, and lumbar cushions

Consumer Electronics: Testing compression performance of touch buttons, soft housings, and cushioning pads

Medical Products: Assessment of compression characteristics of dressings, protective pads, and soft materials

Scientific Research: Studies on material compression mechanics, tactile comfort, and rebound performance

Standards

GB/T 6669-2011 — Test methods for compression properties of rubber, foam, and soft materials

ISO 3386-1/2 — Determination of compression properties of foam

ASTM D3574 — Standard test methods for flexible polyurethane foam

Technical Parameters

Parameter	Specification
Dimensions / Weight	Tester: W170 × D220 × H460 mm / 13 kg Electronic Amplifier: W180 × D400 × H400 mm / 13 kg
Power Supply	AC 100V, max. power 20W
Measurement Environment	Temperature 20–30℃, Humidity 50–70% RH, non-condensing
Compression Load Testing	Differential transformer (ring-type load cell)
Compression Load Range	100 gf, 200 gf, 500 gf, 1000 gf (switchable)
Compression Load Accuracy	≤ ±0.5% full scale
Compression Deformation Measurement	Potentiometer
Maximum Compression Deformation	20 mm
Deformation Accuracy	≤ ±0.5% full scale
Compression Platen Area	2 cm² (standard circular platen)
Compression Speed	Standard: 0.02 mm/sec High Sensitivity: 0.0067 mm/sec Adjustable
Sample Size	Square 2–10 cm

Test Principle

The G5 Compression Tester measures the material response under localized pressure. A standard circular platen applies controlled compression to the sample. Load cells (differential transformers) measure applied force, while potentiometers record deformation. The device can calculate compression hardness, compression work, and recovery properties, providing quantitative analysis of tactile performance and material elasticity.

Operation Instructions

Prepare a sample (2–10 cm square, thickness as required).

Place the sample under the circular compression platen.

Select the desired load (100 gf–1000 gf) and compression speed (standard or high sensitivity).

Start the test; the instrument measures compression force, deformation, and recovery.

Record and analyze data to evaluate material compression performance.

Maintenance Information

Clean the compression platen before and after each test.

Inspect load cells and potentiometers for calibration and wear.

Avoid exposure to moisture or corrosive materials.

Store in a stable environment, avoiding vibration and direct sunlight.

Other supplier products

	Best commercial steamer for clothes	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 15797: Industrial washing and drying procedures for textiles. GB/T 4288-201...
	Accurate Combustion Threshold Measurement	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Minimum Ignition Temperature Tester is a way of testing the sensitivity o...
	Leather Water Vapor Permeability Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Productinformation The vaporpermeability of leather is evaluated by means of measuring the...
	Face Mask Tensile Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Face Mask Tensile Tester is designed to measure tensile strength, elongation at break, ...
	Single Cable Vertical Flame Tester Manufacturer | IEC 60332-1-2 Cable Flammability Test Equipment Supplier	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Parameter DescriptionDetails Com...

All supplier products

Same products

	Paper roughness tester for quality control	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Paper Roughness and Air Per...
	Gas transmission rate tester supplier	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Differential Pressure M...
	Fully automatic spinneret mirror inspection instrument	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction ① Mechanical Components Ove...
	Advanced textile air permeability tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Air Permeability Tester ...
	Anti-scratch surface performance tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Surface Performance Test...