CNC Flame Metal Cutting Machine

CNC Flame Metal Cutting Machine with Auto Ignition and Auto Height-adjusting

Specifications:

1. Model: CNC/GDZ-3000

2. Drive mode: Single side drive

3. CNC cutting torch: 2 sets

4. Straight cutting torch: 9 sets

5. Rail Gauge: 3000mm

6. Effective cutting width (mm): 230~2200

7. Rail Length (mm): 15,000 (valid cutting length 12,500)

8. Cutting depth: 6~100

9. Material of Plate: Stainless steel, carbon steel or other material

10. Cutting Gas: Oxygen, Propane or Ethyne or other cutting gas

11. Free running speed: 4000mm/min

12. Cutting precision: ±0.5mm/mm

13. Repeatability precision: ±0.5mm/mm

Description:

This CNC flame metal cutting machine adoptsFAGOR8035-CNC system,Japan Panasonic servo system,Japan(SHIMPO) ABLE reducer,auto-ignition device andShenzhen capacitive auto-height regulator CHC-200D.

For Japan Panasonic servo system, theAC servo motor has small volume, big output torque, quick response, adopted incremental pulse coder as the position feedback and speed feedback component, convenient installation and beautiful appearance.

Japan(SHIMPO) ABLE reducer is one of super-silence reduce .Because the tilt gear wheel instead of the line gear wheel and can decrease 10%.This motor have precision position(less than 0.05o )and show high precision motor features , thus can fully exhibit high-precision servo motor’s capacity.

Auto-ignition deviceis composed of lighting torch, ignition cable, gas soft tube and fixed frame. One end of ignition cable connect with lighting torch, another end connect with ignition controller; one end of gas soft tube connect with lighting torch, another end connect with gas source (center gas collecting pipeline), on and off of gas is controlled by electromagnetic valve, the fixed frame fix the lighting torch beside single cutting torch.

CHC-200D capacitive auto-height regulator is a closed loop control system, it is composed of signal control, signal treatment transfer, logistics control and motor driven, it is used in CNC cutting machine’s torches, such as flame cutting torch, plasma cutting torch and laser cutting torch and so on.

Other supplier products

	CNC Flame Metal Cutting Machine	CNC Flame Metal Cutting Machine with Auto Ignition and Auto Height-adjusting Specifications: 1. Model: CNC/GDZ-3000 2. Drive mode: Single side d...
	CNC Flame Metal Cutting Machine	CNC Flame Metal Cutting Machine with Auto Ignition and Auto Height-adjusting Specifications: 1. Model: CNC/GDZ-3000 2. Drive mode: Single side d...

Same products

	2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system	Seller: 824681	What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm...
	Horizontal Machining Center	Seller: Xilong (Shanghai) Machine Tool Co., Ltd.	Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ...
	Horizontal Lathe	Seller: Xilong (Shanghai) Machine Tool Co., Ltd.	As a professional horizontal lathe manufacturerand horizontal lathe factory, Sealion Machine Tool...
	Gantry Machining Center	Seller: Xilong (Shanghai) Machine Tool Co., Ltd.	SEALION supplies Gantry Machining Center both tables moving type or gantry moving type. Gantry ty...
	Floor Type Boring Mill	Seller: Xilong (Shanghai) Machine Tool Co., Ltd.	Floor Type Boring Mill is suitable for large size jobs to do milling, boring, drilling, etc. The ...