INTEGRATED REBAR CUTTING & BENDING MACHINE
INTEGRATED REBAR CUTTING & BENDING MACHINE,Space saving Integrated Rebar Cutting,Save labor Integrated Rebar Cutting
Space saving Integrated Rebar Cutting
Save labor Integrated Rebar Cutting
A perfect Combination of rebar shear line &rebar bending center
Highlights:This production line is a perfect combination of rebar shearing line and rebar bending centerAn integrated equipment with the function of both shearing and bendingIt realizes lean manufacturing of rebar processingSpace saving: no space required for cut-to-size rebar, the combined machine covers an area of 120㎡Save labor: the machine is with direct consignment, save the labor for lifting and carryingImproved efficiency: process the raw material into semi-finished bends with minimum durationguaranteed quality: the working procedure is closely connected, enables to detect abnormal conditions and correct it without delayEasy operation: equipped with humanized running program and modularized setting. easy to operate
INTEGRATED REBAR CUTTING & BENDING MACHINE
|
Model |
KQW32BX |
||||||||||||||||||
|
Max Shear Foree (KN) |
1750 |
||||||||||||||||||
|
Conveying Speed(m/min) |
≤60 |
||||||||||||||||||
|
Max Steel Strength (MPa) |
570 |
||||||||||||||||||
|
Cutting Langth (mm) |
Manual |
0-1200 |
|||||||||||||||||
|
Automatic |
1200-12,000 |
||||||||||||||||||
|
Culling Capacity |
(φ)(mm) |
10 |
12 |
14 |
16 |
18 |
20 |
22 |
25 |
28 |
32 |
36 |
40 |
||||||
|
17 |
14 |
12 |
11 |
9 |
8 |
8 |
5 |
5 |
4 |
2 |
2 |
||||||||
|
15 |
12 |
11 |
9 |
8 |
7 |
7 |
5 |
4 |
3 |
2 |
2 |
||||||||
|
Average Pewer Consumption (KW/h) |
25 |
||||||||||||||||||
|
Max Bending Angle (°) |
(φ10-φ28) +180 -100(φ32) +90 -90 |
||||||||||||||||||
|
Max Bending Size (mm) |
10500 |
||||||||||||||||||
|
Min Bending Size (mm) |
90 |
||||||||||||||||||
|
Min Bending Size Length (mm) |
(φ10),(630)(φ25),(650) |
||||||||||||||||||
|
Length Tolerance (mm) |
±2 |
||||||||||||||||||
|
Bending Tolerance (°) |
±1 |
||||||||||||||||||
|
Speed Control |
CNC Servo control |
||||||||||||||||||
|
Labeled elechic Power (kw) |
14 |
||||||||||||||||||
|
Moving Speed (m/s) |
|||||||||||||||||||
|
Bending Speed (°/s) |
65 |
||||||||||||||||||
|
Cylinder Pressure (Mpa) |
|||||||||||||||||||
|
Manufacture range |
Strand Diameter φ(mm) |
10 |
12 |
14 |
16 |
20 |
22 |
25 |
28 |
32 |
|||||||||
|
Nos to be sheared (pcs) |
6 |
5 |
4 |
3 |
3 |
2 |
2 |
1 |
1 |
||||||||||
|
Weightlkg) |
4500 |
||||||||||||||||||
Send product request
Other supplier products
|
|
INTEGRATED REBAR CUTTING & BENDING MACHINE | INTEGRATED REBAR CUTTING & BENDING MACHINE,Space saving Integrated Rebar Cutting,Save labor Integrated Rebar Cutting Space saving Integrated R... |
 |
automatic stirrup bender machine | KZ12ADX is special model to manufacture stirrup bender from straight bar.The machine is capable of providing our clients the most accurate ... |
 |
cnc wire bending machine （KZ12CX) | This machine is a , which integrates straightening, positive bending and reverse bending forming and cutting four functions in one, steel bar hoo... |
 |
VERTICAL DOUBLE BENDER | VERTICAL DOUBLE BENDER,high efficiency rebar shear-line,Vertical Double Bender Factory high efficiency rebar shear-line Vertical Double Bender Fa... |
 |
DOUBLE WIRE STRAIGHTENING & CUTTING MACHINE (KZ12TX) | DOUBLE WIRE STRAIGHTENING & CUTTING MACHINE (KZ12TX),High Speed Straightening Cutting Machine,Double Wire Straightening Cutting Machine High S... |
Same products
 |
Magnesium ingot/magnesium alloy ingot polishing machine | Seller: Puyang Mingli Petrochemical Machinery Manufacturing Co., Ltd. | It can remove the impurities, defects of magnesium alloy ingot, and make its surface smooth and f... |
 |
aluminum ingot chip cutting machine | Seller: Puyang Mingli Petrochemical Machinery Manufacturing Co., Ltd. | We have aluminum ingot chipping machine and aluminum ingot granulation and powder production line... |
 |
MTL5582B MTL Intrinsically Safe Isolator 5500 Series RTD-RTD Isolator | Seller: 840499 | MTL 5500 Intrinsically Safe Isolators Resistance Isolator MTL5582B MTL4582B - MTL5582B RESISTANC... |
 |
3015 fiber metal cnc laser cutting business | Seller: Jinan Weihua Machinery & Equipment Co., LTD | The tubes must be made of copper or VA stainless steel , non-oxidised and clean, the authorized g... |
 |
3015 fiber metal laser cutter for sale | Seller: Jinan Weihua Machinery & Equipment Co., LTD | 3015 fiber metal laser cutter for sale 3000x1500mm cutting size Cutting gases Consumptions of ... |
