Easy operation Integrated Rebar Cutting
Model KQW50X Shearing part Max Shear Foree (KN) 1750 Co
|
Model |
KQW50X |
||||||||||||||||||||
|
Shearing part |
|||||||||||||||||||||
|
Max Shear Foree (KN) |
1750 |
||||||||||||||||||||
|
Conveying Speed(m/min) |
≤60 |
||||||||||||||||||||
|
Max Steel Strength (MPa) |
570 |
||||||||||||||||||||
|
Cutting Langth (mm) |
Manual |
800-12,000 mm |
|||||||||||||||||||
|
Automatic |
1500-12,000 mm |
||||||||||||||||||||
|
Culling Capacity |
(φ)(mm) |
10 |
12 |
14 |
16 |
18 |
20 |
22 |
25 |
28 |
32 |
36 |
40 |
||||||||
|
17 |
14 |
12 |
11 |
9 |
8 |
8 |
5 |
5 |
4 |
2 |
2 |
||||||||||
|
15 |
12 |
11 |
9 |
8 |
7 |
7 |
5 |
4 |
3 |
2 |
2 |
||||||||||
|
Average Pewer Consumption (KW/h) |
9 |
||||||||||||||||||||
|
Shearing Machine size (mm) |
25000*3500*2000 |
||||||||||||||||||||
|
Bending part |
|||||||||||||||||||||
|
Conveying speed |
40 (m/min) |
||||||||||||||||||||
|
Bending speed |
6-8r/min |
||||||||||||||||||||
|
Benders no° |
2 |
||||||||||||||||||||
|
Mobile bender move method |
Automatic |
||||||||||||||||||||
|
Power consumption |
10 (kwh) |
||||||||||||||||||||
|
1200 (mm) |
||||||||||||||||||||
|
Accuracy ol bending angle |
±1° |
||||||||||||||||||||
|
Conveyor load capacity |
1000 (KG) |
||||||||||||||||||||
|
Power supply voltage |
380V/50Hz/3phase |
||||||||||||||||||||
|
TotaL power |
30 (kw) |
||||||||||||||||||||
|
Total weight |
|||||||||||||||||||||
|
Bars diameter |
10 |
12 |
14 |
16 |
20 |
25 |
28 |
32 |
40 |
50 |
|||||||||||
|
Bending bars no° |
7 |
6 |
5 |
5 |
4 |
3 |
3 |
2 |
1 |
1 |
|||||||||||
STRUCTURE & CHARACTERS
Suitable for maximum steel bar length 12m.Maximum carrying capacity 1,500Kg.
12-m long feeding tracks consisting of motorized rollersLength could be specially designed
Pneumatic-mechanical cutting head.175 tons cutting capacity.Width of cutting blade: 300mm.Cutting frequency: 22 times/min.
12-m gauging and transfer tracks consisting of motorized rollersServo motor drived length measuring system.3 measuring system to maximize the gauging speed.
3 storage pockets at each side.Pneumatically operated, automatic stack.
- CONNECTING RACKu
Connect the
1 mobile bender1 fixed benderServo motor drivenPneumatically operated lifting device, delivery straight bars to bending mandrel and transfer shaped bars to storage rack.Pneumatically operated clamp device will fix the steel bars while bending.Shaped bars storage rack.
Touchable screen display.Optimized software, less scrap.Trouble shooting program to detect any failure or problem.
Send product request
Other supplier products
|
|
Easy operation Integrated Rebar Cutting | Model KQW50X Shearing part Max Shear Foree (KN) 1750 Co Model KQW50X Shearing part Max Shear Foree (KN) ... |
 |
high efficiency rebar shear-line | The machine has two bender to bend at the same time,has greatly enhanced efficiency and reduce the manual labor intensity. The vertical double b... |
 |
automatic Stirrup bending machine (8-Shaped) | automatic Stirrup bending machine (8-Shaped),bridge Stirrup Bender,real estate Stirrup Bender,reinforcing steel processing factories Stirrup Bender... |
 |
high output Truss Girder Welding Machine | Highlights: International famous trademarks are selected for key driving parts, actuators, and electric/pneumatic components; the life cycle... |
 |
steel wire bending machine | Stirrup bender is designed to complete straightening,bending and cutting on one machine. Coil is the prefer raw material choice .The machine ... |
