bridge Stirrup Bender
Grid arch ，as a kind of tunnel arch is commonly used in highway, railway tunnel, and the initial support in mine roadway construction . However, with complex shape，huge number, difficult processing and intensity workers labor, 8-Shaped Rebar molding Machine is the important part of grid arch. People from SKZ has been constantly dedicated to the development of the automatic .We focus on the special shape and requirements of 8-Shaped Rebar molding Machine, base on the original and make the original complex processing more simple, standard, efficient and energy saving. We visit processing site and truly understand many difficulties of the traditional processing and realize that advanced ideas and elements in modern manufacturing should be introduced into the design,that is lean production, which means the product of any processes has no accumulation ( do not take place), the product does not need human-powered transport,so that make our products a real sense of flow , make a better use of the space for production site , therefore ,the entire production line is neat harmonious and corporate image can be improved radically.Grid arch ，as a kind of tunnel arch is commonly used in highway, railway tunnel, and the initial support in mine roadway construction . However, with complex shape，huge number, difficult processing and intensity workers labor, 8-Shaped is the important part of grid arch.
|
8-Shaped Rebar melding Machine |
8-Shaped butt welding machine |
Butterfly Bar hydraulic forming machine |
|||
|
Model |
KHD16BX |
Model |
KDH125X |
Model |
KDX100K |
|
Bending bar diameter |
φ14 φ16 |
Butt welding bar diameter |
φ14 φ16 |
Oil Cylinder speaficabons (mm) |
φ100×200 |
|
Nomal force (KN) |
100 |
||||
|
Maximum feed speed (m/min) |
60 |
Production efficiency (pcs/h) |
300 |
Maximum stroke (mm) |
200 |
|
Maximum opening size (mm) |
280 |
||||
|
Production efficiency (pcs/h) |
200 |
Rated capacity (KVA) |
125 |
Oil Cylinder downstream speed (mm/s) |
60 |
|
Rated power (KW) |
25 |
Maximum forging force (KN) |
40 |
Oil Cylinder upstream speed (mm/s) |
60 |
|
Working environment temperature (°C) |
-5-40 |
Maximu m feeding schedute (mm) |
40-50 |
Working surface height (mm) |
860 |
|
Cylinder Pressure (MPa) |
≤0.6 |
Cooling water consumption (L/H) |
300 |
Working surface size (mm) |
590×300 |
|
Dimension (LtW,H) (mm) |
3150x1200x2000 |
Dimension (L*W*H) (mm) |
1770x1655x1230 |
Hydraulic oil capacity (L) |
80 |
Send product request
Other supplier products
 |
rebar shear-line Factory | This cutting machine is used to cut high-tensile steel bars of big diameter into expected-length pieces which will be then sorted and stored, al... |
|
|
bridge Stirrup Bender | Grid arch ，as a kind of tunnel arch is commonly used in highway, railway tunnel, and the initial support in mine roadway construction . However,... |
 |
reduce cost Stirrup bender | Stirrup bender is designed to complete straightening,bending and cutting on one machine. Coil is the prefer raw material choice .The machine ... |
 |
Wire bending machine (KZ12BX) | Wire bending machine (KZ12BX),steel wire bending machine,automatic Stirrup bender,automatic Stirrup bending machine steel wire bending machine au... |
 |
Threading Machine | This machine is designed for the steel bar end threading processing，it can finish the thread processing according to request and increase the en... |
Same products
 |
Magnesium ingot/magnesium alloy ingot polishing machine | Seller: Puyang Mingli Petrochemical Machinery Manufacturing Co., Ltd. | It can remove the impurities, defects of magnesium alloy ingot, and make its surface smooth and f... |
 |
aluminum ingot chip cutting machine | Seller: Puyang Mingli Petrochemical Machinery Manufacturing Co., Ltd. | We have aluminum ingot chipping machine and aluminum ingot granulation and powder production line... |
 |
MTL5582B MTL Intrinsically Safe Isolator 5500 Series RTD-RTD Isolator | Seller: 840499 | MTL 5500 Intrinsically Safe Isolators Resistance Isolator MTL5582B MTL4582B - MTL5582B RESISTANC... |
 |
3015 fiber metal cnc laser cutting business | Seller: Jinan Weihua Machinery & Equipment Co., LTD | The tubes must be made of copper or VA stainless steel , non-oxidised and clean, the authorized g... |
 |
3015 fiber metal laser cutter for sale | Seller: Jinan Weihua Machinery & Equipment Co., LTD | 3015 fiber metal laser cutter for sale 3000x1500mm cutting size Cutting gases Consumptions of ... |
