Die casting
The Die Castng involvs 3 key elements: die casting machine, the mold and the alloy materials, the die casting could be described as the process of combining pressure, speed and time to achieve a ideal casted meatal part. The pressure applied during the casting process is the different feature from other casting method. Typically the melted metal was filled into the mold with high pressure and speed, and solidification under pressure as well to forming the casted part. Usually the pressure applying during the casting process is over dozens Mpa, with meatal pouring speed of 16~80 m/s, the liquid metal only takes 0.01~0.02 second to fully fill the die cavity.
Description of Die Casting
Die casting is a casting method in which a liquid or semi-solid metal or alloy, or liquid metal or alloy containing an enhanced phase, which is filled into the cavity of a die casting mold at a high rate under high pressure, and the metal or alloy is solidified under pressure to form a casting. The pressure commonly used in die casting is 4~500MPa, and the die cast metal filling speed is 0.5-120m/s. Therefore, high pressure and high speed is the fundamental difference between die casting method and other casting methods and is also an important feature.
The principle of die casting is mainly the principle of pressure injection molding of the metal fluid. The die casting conditions are usually set by adjusting the speed and pressure on the die casting machine, as well as the switching position of the speed, and the rest is selected in the die casting mold line.
Features of Die Casting
Die casting is a casting method in which molten alloy liquid is poured into a press chamber, filling the die casting mold cavity of a steel mold at high speed and causing the alloy liquid to solidify under pressure to form a die casting mold.
The main feature of die casting that distinguishes it from other casting methods is high pressure and high speed.
①The die cast metal fluid is filled into the die casting mold cavity under pressure and crystallized and solidified under higher pressure, commonly 15-100MPa.
②The die cast metal liquid fills the die casting mold cavity with high speed, usually at 10-50m/s. Some can also exceed 80m/s, (the linear speed of the cavity through the internal gate-internal gate speed), so the filling time of the die cast metal liquid is very short, about 0.01-0.2 seconds (depending on the size of the casting and difference) within. The die casting mold cavity can be filled within 0.01-0.2 seconds (depending on the size of the casting).
Advantages of Die Casting
The die casting process has several obvious advantages such as high production efficiency, low operation skills requiring, high accuracy, and tolerance class for the finished product. As a result, a portion of raw material is saved and further machining process is not required either. Also, the die casting is able to produce detailed parts, which is a perfect option for the big amount of pieces production. So generally speaking, the die casting is considered to be efficient, economic, a broad range of shape capable, long life, versatile applied casting process. Especially for the aluminum and alloy die cast metal parts, it has been widely applied.
Application of Die Casting
Due to the advantages of die casting, it is widely used, mainly in the mass production of non-ferrous alloy castings.
In the die casting production, accounting for the largest proportion is aluminum alloy die casting, which is 30% to 50%; followed by zinc alloy die casting; copper alloy die casting accounted for 1% to 2%. Application of die casting most is the automobile, tractor manufacturing, followed by instrument manufacturing and electronic instrument industry, and then agricultural machinery, defense industry, computer, medical equipment, and other manufacturing industries.
The parts produced by die casting mold are engine cylinder block, cylinder head, transmission case, engine cover, instrumentation and camera shell and bracket, pipe fittings, gears, etc.
In recent years, high technology has been applied to the field of the die casting mold. Such as the use of a three-stage injection mechanism to control the pressure, injection speed, and gas in the mold. The development of special die casting processes (such as vacuum die casting, directional pressure casting, oxygen die casting, etc.) and the application of computer control technology, effectively remove the pores, improve the density of the casting, while developing new die casting mold materials and heat treatment of new technology to extend the service life, so that the ferrous die casting metal has made some progress.
Why die casting is used?
Rayforce Manufacture is a private metal casting factory, we provide cold chamber die casting process pdf, aluminium casting defects and remedies pdf,high precision die castingand etc. Want to buy die castingor know what is die casting in manufacturing process, what are the types of die casting? Please contact us.
Send product request
Other supplier products
 |
Silica Sol Investment Casting | The silica sol also shares the name of water glass in general. It is used in the metal casting process as mold adhesive which is mixed with sand an... |
 |
Compressors & Gears | Rayforce's metal cast iron gearscan be applied to Turbo blowers, air control component, piston compressors, casting gears, etc. Application of C... |
 |
Stainless Steel Investment Casting | The stainless steel has much better physical properties then iron and normal steel, but it possesses worse casting properties. Because the stainles... |
 |
Green Sand Casting | Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, ... |
 |
Application | Metal Casting Applications Marine Our metal casting chinacan be applied to anchor, stern frames, anchor winch part, container corner castings, pr... |
Same products
 |
METAL BRACKETS | Seller: JCL Precision Part Co.Ltd. | Custom metal brackets are some of the strongest supports. JCL precision-engineers them to your cu... |
 |
Ceramic Core Injector | Seller: Qinhuangdao Aifu Science & Technology Co., Ltd. | The Ceramic Core Injector is designedspecifically for producingcomplex, high quality and high pre... |
 |
Wax Injection Machine | Seller: Qinhuangdao Aifu Science & Technology Co., Ltd. | The Wax Injection Machine is used to make wax patterns in the investment casting process with mid... |
 |
Automatic Dewaxing Autoclave | Seller: Qinhuangdao Aifu Science & Technology Co., Ltd. | Dewaxing Autoclave is specially designed for removing the wax patterns in the ceramic shell. Ins... |
 |
CNC TURNING | Seller: Baoji Haiqiao Industrial & Trading Co., Ltd. | As a CNC turning manufacturerin China, HQ has the capacity to dealing with both small lot and mas... |
