PE heat preservation pipe production line
This PE pipe machine is mainly used in producing PE large diameter tube, and its products are mainly applied to the outer layer of heating pipeline (which its middle layer is the ammonia fat gathering and foaming level, and its inner layer is the steel pipe), besides that the units can produce the delivery pipe, the discharge pipe and so on. The units is mainly composed of the extruding machine, the nose, the cooling water trough, the tractor, the cutter, the card tube machine, the support and the electrical control department etc.
Main technical parameters：
| Extruder |
Tractor |
The main mold |
Trombone range |
| JW90-1/25 |
JW-400-4 |
φ 110、φ250 |
φ 75-φ400 |
| JW120-1/25 |
JW-800-6 |
φ 42 |
φ 400-φ760 |
| JW150-1/25 |
JW-1500-8 |
φ 760 |
φ 600-φ1400 |
Other supplier products
|
|
PC/PMMA/ABS/PS/PP sheet production line |
PETG/APET/PP/PC/PS/ABS/PE/PMMA sheet production equipment is capable of continuously producing mono-layer or multi-layer PP/PE/ABS/PMMA/PC/PS/HIPS ... |
|
|
XPS foam board production line |
Introduction of The Product:XPS foam board production line is a well sell plastic machine in the world for the XPS foamed sheet has a perfect close... |
|
|
PC/PMMA/ABS/PS/PP sheet production line |
PETG/APET/PP/PC/PS/ABS/PE/PMMA sheet production equipment is capable of continuously producing mono-layer or multi-layer PP/PE/ABS/PMMA/PC/PS/HIPS ... |
|
|
Efficient single-screw extruder |
Characteristics:High yield, low consumption.Thermal processing and fine milling for each gear in reduction gearbox with hard gear surface, compelle... |
|
|
Efficient single-screw extruder |
Characteristics:High yield, low consumption.Thermal processing and fine milling for each gear in reduction gearbox with hard gear surface, compelle... |
All supplier products
Same products
