PVC Windows and Door Profiles Extrusion Line
The door and windows profile is made of PVC powder. It is widely used as window and door profile, as well as decorative material. With modern technology and optimized design, it has the property of high output capacity, long life and plastic evently.
This production line uses PVC powder as material to produce various sorts of the mentioned plastic profiles as profiles for doors and windows, decorative profiles, etc. As the extrusion line is optimumly designed by referring to the latest overseas technology, it bears the features of even plasticization, low cutting rate, high output, and long lifespan, etc. And it composes conical double-screw extruder, vacuum sizing platform, tractor, cutting and film coating machine and material stirring bracket,etc. The main machine is run by alternating current frequency controller or direct current controllable silicon. The temperature controlling instrument is introduced from abroad. In addition, the vacuum pump and traction engine of the auxiliary machines are quality products which can be maintained easily. If change certain screw and mould, this profiles extrusion line can directly extrude foaming profiles, and the effect is much better than that of single-screw.
PVC Windows and Door Profiles Extrusion Line is designed for extrusion of PVC plastic door’s and window’s profiles and cross-section communication cable pipes, Aluminum-plastic composite profiles, etc. It has stable plastification, high output, low sheering force, long life service and other advantages. PVC profiles can be used in the building industry and home or office.
Main technical parameters：
| Model |
JW180 |
JW240 |
JW300 |
| Max profile width（mm） |
180 |
240 |
300 |
| Auxiliary total power（kw） |
18.7 |
27.5 |
33.1 |
| Cooling water capacity（m3/h） |
5 |
7 |
7 |
| Compressed air pressure（MPa） |
0.5 |
0.6 |
0.6 |
Other supplier products
|
|
PC/PP/PE Hollow Sheet production line |
The set of the special equipment for directly extrusion of hollow grid plates,with the product surface being bright and clean,artistical and compre... |
|
|
PC/PMMA/ABS/PS/PP sheet production line |
PETG/APET/PP/PC/PS/ABS/PE/PMMA sheet production equipment is capable of continuously producing mono-layer or multi-layer PP/PE/ABS/PMMA/PC/PS/HIPS ... |
|
|
Efficient single-screw extruder |
Characteristics:High yield, low consumption.Thermal processing and fine milling for each gear in reduction gearbox with hard gear surface, compelle... |
|
|
Efficient single-screw extruder |
Characteristics:High yield, low consumption.Thermal processing and fine milling for each gear in reduction gearbox with hard gear surface, compelle... |
|
|
PE heat preservation pipe production line |
This PE pipe machine is mainly used in producing PE large diameter tube, and its products are mainly applied to the outer layer of heating pipeline... |
All supplier products
Same products
