LSG-1600 Type C Goniophotometer
LSG-1600 Type C Goniophotometer is an automatic goniophotometric measurement system for measuring photometric parameters of luminaires, such as LED road lighting fixture, room lighting fixture and projecting lighting fixture. The measured data meets IES standard format and can be applied for lighting design by lighting design software. The measurement system fully satisfies the requirement of lighting design work. Measurement: Electronic parameters, spatial intensity distribution curve, spatial iso-intensity curve, iso-illuminance distribution curve, luminance limitation curve, luminaire efficiency, glare grade, effective beam angle, upward luminous flux ratio, downward luminous flux ratio, total luminous flux, effective luminous flux, utilization factor. Features: • C-γ test Meets the requirements of CIE, IEC, IES & GB standards • The installation of luminaire if made of a special laser cross aim device • The special rotating electric devices for the tested luminaire • Provided with the precious metal fiber for signal transmission • Measured data is matched with international standard form (IES) and can be applied for lighting design by other lighting design software such as Dialux • RS-232C interface, compatible with all kinds of computers Specifications: • Photometric accuracy: class 1 (1%) • Test range of illuminance: 0.001Lx to 100,000Lx • Angle accuracy: 0.01 degree • Rotating scope: H: -180°~+ 270°; V: -180°~+ 180 • Electric meter accuracy: class 0.5 • Principal axis goniometer resolution: 0.0016 degree • Luminaire can be rotated by -180 ~ 180°or 0 ~ 360°along with vertical axis • Luminaire can be rotated by -180 ~ 180°or 0 ~ 360°along with horizontal axis • Maximum capacity of luminaires: 2KW/30kg and 1.3mx1.3m luminaries (LxW) • Measuring distance: Between 5m ~ 30m
you may surf our website of our company to get more information in here:
Send product request
Other supplier products
|
|
LSG-1600 Type C Goniophotometer | LSG-1600 Type C Goniophotometer is an automatic goniophotometric measurement system for measuring photometric parameters of luminaires, such as LED... |
 |
KH3961 EMI Test System | KH3961 is an automatic EMI receiver. It is a main test system for EMI (Electro Magnetic Interference) testing. The KH3961 is produced by the full c... |
 |
WT2080 LED Power Driver Tester | WT2080 LED Power Driver Test Instrument is the comprehensive test instrument for LED drive power which is according to GB/T 24825-2009 and IEC 6238... |
 |
LPCE-1 Spectrophotometer & Integrating Sphere Test System | LPCE-1 Integrating Sphere Spectrophotometer Test System is suitable for photometric and colorimetric measurement of luminaries such as Energy-savin... |
 |
CHROMA-2 Pocket Chroma Meter | Pocket Chroma Meter|Pocket Colorimeter is developed based on TOSHIBA TCD1304DG linear array CCD detector. It makes traditional laboratory instrumen... |
Same products
 |
Real-time online high-frequency detection detector BQJ-D430 | Seller: Eastloong Measurement & Control Technology Co.,Ltd. | Real-time online high-frequency detection detectorBQJ-D430 Purpose:Take all-round photography of... |
 |
Maintenance free Real-time rebar special measuring instrument GDC-L350-JX | Seller: Eastloong Measurement & Control Technology Co.,Ltd. | Purpose:DFL special rebar measuring instrument, which is different from the rebar measuring instr... |
 |
Fully automatic online surface defect detection equipment BQJ-D4100 | Seller: Eastloong Measurement & Control Technology Co.,Ltd. | Purpose:Take all-round photography of rods and wires, bar steel, square steel, rebar, etc. in a r... |
 |
Petroleum and Natural Gas Industry Vacuum Gauges -60kpa | Seller: Greentech Industry (Jinan) Co., Ltd | 1.High-performance and robust design: The High-Pressure -60kpa Vacuum Gauges Electric AC Blade Bl... |
 |
Optical Brightener OB-1 (OBA 393) | Seller: Jinan Ogilvy Chemical Co., Ltd | Chemical Name: 2-[(Ethylsulfanyl)methyl]phenyl methylcarbamateC.I.: 393CAS: 1533-45-5Molucular Fo... |
