FDT-0233 Automatic low temperature closed cup Flash Point Tester
Scope
Standard GB / T261-83 and ISO2719-1988 international standards.
Features
1, large-screen LCD, friendly user interface
2, also has a fault of Jane function, automatic fault prompts
3, automatic temperature control, automatic lid opening and ignition, automatic print, automatic cooling, automatic air pressure correction is completed and the machine automatically displays the flash point temperature, built-in mini thermal printer to automatically report the test results
4, using USB / 232 communication interface to communicate with the host machine, a centralized management system for easy composition
5, from Germany imported stainless steel temperature sensor for detecting the temperature data is accurate and reliable
6, mechanical moving part of the servo-driven belt drive, work without gaps, low noise, reliable easy to damage, no lubrication maintenance.
7, just set the expected flash point, the instrument automatically in strict accordance with the standard test, the test ends automatically print test results, and there is a tone. Without judgment and do not rely on the operator's proficiency.
8, thermocouple detection sensitivity high detection accuracy, durability and easy maintenance.
9, sample box with built-in cooling mode heating thermostat thermal compound, and the use of German imports whisk Dan Adams compressors, thermostats no lag reliable, easy to damage
Technical Parameters
- ℃ Relative humidity: ≤ 80%
2, Display: large-screen LCD
3, heating rate: less than 50 ℃ 1 ℃ / min, higher than 50 ℃ 2-3 ℃ / min
4, temperature range: -30 ~ + 80 ℃, accuracy ± 1 ℃
5, the temperature measurement element: PT100 stainless steel temperature sensor
6, the ignition: gas flame ignition
7, Detection: Automatically detects a flash fire and automatically print test data.
9, cooling system: compressor cooling
10, print: You can print the results of this experiment or any print storage
11, using the power AC220V 50Hz, the total power: 1.5 kw
Send product request
Other supplier products
 |
FDT-0311 Pour point / cold filter plugging point of petroleum products tester | Scope Pour point / cold filter plugging point of petroleum products tester is in accordance with GB / T510 "Determination of the pour point of petr... |
 |
FDR-3201 sulfur content analyzer (X-ray spectroscopy) | Scope Petroleum product sulfur content analyzer (X-ray spectroscopy) is in accordance with People's Republic of China standard GB / T11140, GB / T1... |
 |
Automatic volume resistivity tester | Scope Automatic volume resistivity tester is based People's Republic of China Electric Power Industry Standard DL / T421-2009 requirements of desig... |
 |
Lubricant oil rust preventing characteristics tester | Scope Lubricant liquid rust meter according to national standard GB / T11143 prescribed design and manufacture of metal corrosion can be determined... |
 |
FDT-0131 Automatic opening flash point tester | Scope Automatic opening flash point tester is based on ASTM D92, GB / T3536 standard "of petroleum products of flash and fire assay (Cleveland open... |
Same products
 |
PHS‑25C Benchtop Digital pH Meter | Seller: Kelilong Electron Co.Ltd | Product Description: Equipped with BNC‑composite electrodes and power supplies adapt... |
 |
PHS‑3C Automatic Calibration pH/Thermometer | Seller: Kelilong Electron Co.Ltd | Product Description: Equipped with BNC‑compatible combination electrodes and power s... |
 |
KL‑016 Benchtop Digital pH Meter (Backlit Display) | Seller: Kelilong Electron Co.Ltd | Product Description: This instrument features a large‑screen digital display, extern... |
 |
KL‑98 Professional Laboratory pH/ORP/Temperature Meter | Seller: Kelilong Electron Co.Ltd | Product Description: The PH‑98 Tester is an easy‑to‑operate, multi‑functional microp... |
 |
KL‑03(I) Pen‑type High‑precision pH Meter | Seller: Kelilong Electron Co.Ltd | Product Description: This instrument is available in a variety of colors. Calibratio... |
