.

FDT-0234 Automatic low temperature closed cup Flash Point Tester

Scope

The instrument is in accordance with iso3679, GB / T 5208 "Determination of flash point - Rapid equilibrium closed cup method" requirements designed and manufactured to meet the petroleum, chemical, coatings, paints, railway, aviation, electricity, commodity inspection, military and Research units closed flash point of petroleum products fast testing requirements.

Features

1, the use of large-screen LCD, keypad operation, friendly man-machine interface

2, the instrument uses automatic design, automatic detection, automatic print results

3, semiconductor refrigeration device, equipment is small, cooling speed, no noise

4, test a small sample, each injection only 2 ml (solid or semi-solid samples each injection to 4 ml)

5, the instrument is fully in line with GB / T 5208 "Determination of flash point - Rapid equilibrium closed cup method" standard design for fast, low temperature closed cup flash point test purposes.

Technical Parameters

1 Power supply: AC 220V ± 10%, 50Hz;

2, the flash point detection range: -30 ~ 50 ℃;

3, the measurement accuracy: less than 2 ℃

4, temperature accuracy: ± 0.5 ℃;

5, ignition devices: electronic ignition point guns;

7, the power supply voltage: ~ 220V ± 10%, 50Hz;

8 Power consumption: less than 300W;

9, the ambient temperature: 5 ℃ ~ 30 ℃;

10, relative humidity: 30 ~ 80RH.



Send product request

To: Changsha Friend Experimental Analysis Instrument Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

FDT-0131 Automatic opening flash point tester
FDT-0131 Automatic opening flash point tester Scope Automatic opening flash point tester is based on ASTM D92, GB / T3536 standard "of petroleum products of flash and fire assay (Cleveland open...
Insulating oil dielectric strength tester transformer oil breakdown voltage tester
Insulating oil dielectric strength tester transformer oil breakdown voltage tester Scope This equipment according to GB/ T507 and industry standards DL429.9 national standard GB designed and manufactured, using a special software ...
lubricant oil foaming characteristics tester
lubricant oil foaming characteristics tester Scope Lubricant foam performance tester is based on national standards GB / T12579 design and manufacture of the provisions for the determination o...
FGC-1010 Gas Chromatograph
FGC-1010 Gas Chromatograph Scope Determination (drinks) volatile organic compounds, blood alcohol content detection, detection of indoor air pollutants (TVOC), flavor liquor ...
FDT-0234 Automatic low temperature closed cup Flash Point Tester
FDT-0234 Automatic low temperature closed cup Flash Point Tester Scope The instrument is in accordance with iso3679, GB / T 5208 "Determination of flash point - Rapid equilibrium closed cup method" requirements d...
All supplier products

Same products

Indicators
Indicators Seller: ZHEJIANG HAOYU INDUSTRY & TRADE CO.,LTD Electronic Scales cannot be properly operated without suitable weighing indicator. Their design a...
HY001 Weighing Indicator
HY001 Weighing Indicator Seller: ZHEJIANG HAOYU INDUSTRY & TRADE CO.,LTD Application of HY 001multiple Funcation Weighing Indicator with Printer HY001 must suitable for ...
WELINK MTP/MPO Adapters
WELINK MTP/MPO Adapters Seller: SHENZHEN WELINK TECHNOLOGY CO., LTD. MTP/MPO Adapters can accurately connect two connectors and reduce connection loss, mainly used fo...
WELINK MTP/MPO Cabels
WELINK MTP/MPO Cabels Seller: SHENZHEN WELINK TECHNOLOGY CO., LTD. MPO/mtp fiber optic cableare designed to avoid crowding and unmanageable data centers, consist of...
Micro Data Centre
Micro Data Centre Seller: SHENZHEN WELINK TECHNOLOGY CO., LTD. A micro data center(MDC) is a small modular data center designed for computer workloads that do n...