High Precision Spectroradiometer Sphere LED Testing Equipment
High Precision Spectroradiometer Sphere LED Testing Equipment LPCE-2 is an Integrating Sphere Spectroradiometer LED Testing System for identifying the performance of single LEDs and LED lamps. LED's quality should be tested by checking its photometric,Website:, colorimetric and electrical parameters. According to CIE127-1997, IES LM-79-08 and IES LM-80-08, it recommends to using an array spectroradiometer with integrating sphere to test SSL products. The LPCE-2 system is applied with a CCD Spectroradiometer (LMS-8000 or LMS-9000) and worked with A molding integrating sphere with testing holder base function which will be more circle and the test results will be more accurate than the traditional integrating sphere.System Configuration: High Precision CCD Spectroradiometer (LMS-8000 or LMS-9000), Optical Fiber (CFO-1.5M),Digital Power Meter (LS2012 or LS2010), DC Power Source (DC Series), AC Power Source(LSP-500VAR or LSP-1KVAR), Integrating Sphere (IS-1.5MA and IS-0.3M), Standard Light Source (SLS-50W and SLS-10W), Optical Path Converter (LS512B), 19 Inch Cabinet (CASE-19IN)Measures: • Colorimetric: Chromaticity coordinates, CCT, Color Ratio, Peak Wavelength, Half Bandwidth, Dominant Wavelength, Color Purity, CRI, Spectrum Test
• Photometric: Luminous Flux, Luminous Efficiency, Radiant Power, Pupil Flux, Pupil Flux Efficiency, Pupil Factor, Cirtopic Flux
• Electrical: Voltage, Current, Power, Power Factor (Option: VF, IF, VR, IR)
• LED optical maintenance test according to LM-80: Flux VS time, CCT VS time, CRI VS time, Power VS time, Power Factor VS time, Current VS time and Flux Efficiency VS time. Specification: • Spectral Range Wavelength: 380nm~800nm (LMS-8000 Option: 380nm~1050nm or 200nm~800nm).
• Spectral Wavelength Accuracy: ±0.5nm, Wavelength Reproducibility: ±0.2nm
• Sample Scanning Steps: ±0.1nm
• Accuracy of Chromaticity Coordinate (Δx, Δy): ±0.003
• Correlated Color Temperature CCT: 1,000K~100,000K, CCT Accuracy: ±0.3%
• Color Rendering Index Range: 0~100.0, Accuracy: ±(0.3%rd±0.3)
• Photometric linear: ±0.5%
• Stray light:<0.015%(600nm) and <0.03%(435nm) • The system includes the auxiliary lamp device and the software includes self-absorption function
• The system can test the inside and outside integrating sphere temperature
• Connect with PC via USB, English version software can be run under WinXP, Win7 and Win8
• The LM-79 Photometric, Color and Electricity report can be exported PDF and LM-80 LED Optical Maintenance test report can be exported Excel or PDF0.03%(435nm)
|
Programmable Insulation Test With Voltage AC0.3~5KV DC0.3~1KV |
Programmable Insulation Test with Voltage AC0.3~5KV DC0.3~1KV The Programmable Insulation Test is a high-performance testing device special for wit... |
|
IEC 60695-2-20 Hot Wire Ignition Test Apparatus |
IEC 60695-2-20 Hot Wire Ignition Test Apparatus Hot wire ignition tester is according to the standard requirement of IEC60695-2-20 and GB4943,Websi... |
|
Lamp Start, Run-up Time And LED Flicker Test |
Lamp Start,Website:, Run-up time and LED Flicker Test Dated 14th December, 2012, the EU officially released the (EU) NO 1194/2012rules.Compared wit... |
|
IEC 60068-2-52, ASTM-B368, MIL-STD-202, EIA-364-26, ASTM-B117 Salt Spray Test Chamber |
IEC 60068-2-52,Website:, ASTM-B368, MIL-STD-202, EIA-364-26, ASTM-B117 Salt Spray Test Chamber The Salt Spray Test Chamber is applicable to the sal... |
|
IEC 60529 DIN40050 And IP5K0 Dustproof Sand And Dust Test Chamber For IP5X And IP6X |
IEC 60529 DIN40050 and IP5K0 Dustproof Sand and Dust Test Chamber for IP5X and IP6X The Dustproof Sand and Dust Test Chamber SC-015 is according to... |