IEC 60529, IEC 60598, IEC 60335 And IEC 60034-5 Water Ingress Testing Equipment For IPX1 To IPX8
IEC 60529,Website:, IEC 60598, IEC 60335 and IEC 60034-5 Water Ingress Testing Equipment for IPX1 to IPX8 JL-X Water Ingress Testing Equipment is according to IEC60529, IEC60598, IEC60335 and IEC 60034-5:2000. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the products such as electrical & electronic products such as LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades.
The whole JL-X waterproof test system includes:
• Drip Box (JL-12): The drip box is for IPX1 and IPX2 drip test. The drip box size is 800x800x75mm (LxWxH). The diameter of drip hole is 0.4mm, distant of drip hole is 20mm, sample can be over 150kg
• Swing Pipe Water Spray Test Equipment (JL-34): It is for IPX3 and IPX4 test, the semi-diameter of swing pipe is 1meter. IPX3 is 120degree and IPX4 is 180degree. The diameter of inside swing pipe is 0.4mm. The automatic sample rotating base diameter is 600mm and speed is 1~5rpm which controlled by PLC panel
• Waterproof Jet Test Device (JL-56): With water supply device size is 1000x1000x600mm, the bore diameter is ф6.3mm (IPX5) and ф12.5mm (IPX6). Diameter of hole is 6.3mm for IPX5 and 12.5mm for IPX6. The water speed is 12.5±0.626L/min for IPX55 and 100±5L/min for IPX6
• Immersion tank Waterproof test Device (JL-7): It is for IPX7 test. The top of the water tank size is 1000x1000x1200mm. The sample testing base is max 120kg. It includes two temperature channels meter and digital display.
• Immersion tank Waterproof test Device (JL-8): It is for IPX8 test. It can measure 0~50m water depth. The water immersion size is diameter is 600mm and height is 1200mm. The compressive stress is 10 atmospheric pressures or design customer request.
Other supplier products
|
|
ANSI/UL94, IEC 60950-1, IEC 695-2-2 Horizontal Vertical Flame Test Equipment |
ANSIUL94,Website:, IEC 60950-1, IEC 695-2-2 Horizontal Vertical Flame Test Equipment Horizontal Vertical Flame Test Equipment meets the requirement... |
|
|
IEC 60068-2-52, ASTM-B368, MIL-STD-202, EIA-364-26, ASTM-B117 Salt Spray Test Chamber |
IEC 60068-2-52,Website:, ASTM-B368, MIL-STD-202, EIA-364-26, ASTM-B117 Salt Spray Test Chamber The Salt Spray Test Chamber is applicable to the sal... |
|
|
IEC60695-2-1, IEC60695-2-10~IEC60695-2-13 Glow-wire Test Apparatus |
IEC60695-2-1,Website:, IEC60695-2-10~IEC60695-2-13 Glow-wire Test Apparatus Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10~I... |
|
|
CIE Standard Integrating Sphere Spectrophotometer Test System |
CIE Standard Integrating Sphere Spectrophotometer Test System This CIE Standard Integrating Sphere Spectrophotometer Test System is suitable for ph... |
|
|
IEC 60695-2-20 Hot Wire Ignition Test Apparatus |
IEC 60695-2-20 Hot Wire Ignition Test Apparatus Hot wire ignition tester is according to the standard requirement of IEC60695-2-20 and GB4943,Websi... |
All supplier products
Same products
