.

ANSI Impact Safety Glass Test Equipment

Impact Testing Equipment

Testing Machine for Mechanical Properties of Tempered Glass

Shot Bag

1)Weight:45kg±0.1kg 46kg±0.1kg

2)Height: 330mm± 13mm

3)Max diameter:250mm

4)Lead sand size: 2.5mm

Pneumatic Tyres Impactor

Pneumatic Tyres Device for Pendulum Test of Glass In Building According to BS EN 12600

Reference standard:

BS EN 12600:2002

Glass in building - Pendulum test - Impact test method and classification for flat glass

MS 1498:2017

Safety glass in building - Specification

Technical Parameters:

Weight 50 kg ± 0.1 kg

Tire pressure: 0.35Mpa ± 0.02Mpa

Type: 3.50-R8 4PR

Impact Frame

Test Frame:

Frame Size: 1900mm*1500mm*3570mm

Samples Size: 1930mm*864mm

Lift: Electric

Release: Auto

Maximum impact height: 1200mm (customized)

Rubber Pad Width: 15mm

Rubber Pad Thickness: 3mm

Rubber Pad Hardness: Shore A50

Drop Ball Impact Test Machine

Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object

Hardness steel ball:

a) 2260g ± 20g, diameter of approximately 82.5mm

b) 227g ± 2g, diameter of approximately 38 mm

c) 1040g ± 10g, diameter of approximately 63.5 mm

d) 508g±3g, diameter of approximately 50 mm

Frame Height: 1000mm, 5000mm, 12000mm, Customized

Automatic release and lift. Power: 220V 50Hz 580W

Supporting fixture:

a) Support Size: 350mm*350mmand 660mm*660mm (Customized)

b) Frame width 15mm

c) Steel box height 150mm

d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50

e) Interposed sheet of rubber: thickness 3mm, hardness shore A50

Applied Test Pieces Size: 300mm*300mm 610mm* 610mm

Head-form Test Device

Head Weight: 10kg Head Size: 500mm*932mm Impact height: < 1.5m Samples size: 1100mm*500mm Felt hat: 90g/89mm/3mm Frame size: 1400mm*666mm*320mm

Safety Glass testing Equipment:

Portable on-site Comprehensive Measurement Instrument for Energy-saving Glass

It is applicable to the field test for opt thermal parameters of energy-saving glass installed and or to be installed

The data that the instrument can measure is: thermal parameters, optical parameters, light transmittance, light reflectance, shading coefficient, U value, LSG, Low-E position, E value, space thickness, overall thickness, glass thickness

The types of glass that the instrument can measure are:

Single pane, Laminated glass, Uncoated insulated glass, Coating on both sides and below, Coating on more than two sides, Coating on both sides and below, Coating on more than two sides, Vacuum glazing

Pummel Test Device:

Hammer head diameter: 30mm

Impact Distance: Adjustable

Shot Bag Impact Testing Frame:

Shot Bag 45kg/46kg

Automatic Release

Electric Lifting

Pneumatic Clamping

PV Load Test Equipment

Size: 6425mm*2000mm*3490mm

Samples: 1643mm*991mm~2009mm*1027mm (Customized)

Source: Sandbag

Load: 2400Pa 5400Pa 8100Pa 10000Pa (Customized)

Pneumatic Tyres Device

Weight 50 kg ± 0.1 kg

Tire pressure: 0.35Mpa ± 0.02Mpa

Type: 3.50-R8 4PR

Forced Entry Resistant Glass Test Device

Axe: 810mm Long

Axe Quality: 1.80kg

Sample size: 610mm*610mm

Insulating Glass Dew Point Meter

Operating temperature: -80°C ~ 100°C

Tube height: 300mm

Tube diameter: 50mm

Temperature resolution: 0.1 °C

Hard/Soft Pendulum Shock Test for Lifts

Hard pendulum shock device

Height: 330± 15mm

Max diameter: 240±10mm

Weight: 10kg ± 0.1kg

Material: according to ISO standard

Filler: 3.5mm 0.25mm

Soft pendulum shock device

Height: 330mm ± 15mm

Maximum diameter: 240mm±15mm

Weight: 45kg ± 0.5kg

Material: leather bag

Filler: diameter 3.5mm ± 1mm lead sand

Boiling Test Device

Power: 220V 50Hz 3Kw (Customized)

Outside Size: 400mm*255mm*480mm

Inside Size: 400mm*255mm*480mm

At most 6 samples with 300mm*300mm

Tempered Glass Flatness Measuring Instrument

Measurement of arcuate form and wave form of toughened glass

Resolution: 0.01mm

Measuring Span: 300mm-12000 mm ( Customized)

Impactor for building Glass and Metal Guardrail

Impact Steel ball

Weight: 1040g ± 10g

Dia: 63mm

Shot bag impactor

Data:

Weight: 45kg ± 0.1kg

Height: 330mm ± 13mm

Max diameter: 250mm

Material: leather bag filling lead shot

Leather thickness: 0.15mm

Lead sand size: 2.5mm

Hard and Soft Body Impactors for Opaque Wall Components

Soft body:

Weight: 50kg

Dia: 400mm

Conical canvas bag filles with 3mm glass sphere

Hard Body:

Steel Ball 0.5 kg/50mm

Steel Ball 1 kg/62.5mm



Send product request

To: Qinhuangdao Yuanchen Technology Equipment Co., Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Stamping Spring leaf
Stamping Spring leaf Application: Instruments and MetersMaterial: Stainless Steel 304Upper spring strip: Size: 46mm*8mm Thickness: 0.4mmLower spring strip: Size: 40mm*1...
Fences Pipe Clamp
Fences Pipe Clamp Function: Pipe clamp for protective fence of mechanical equipment Clamps and fixed feet for safety fences such as workshop isolation and equipment ...
Glass and Metal Guardrail Impact
Glass and Metal Guardrail Impact Reference Standard:JIS A 6601 and JG/T 342 Anti- hard heavy objects impact performance test: Impactor: Solid steel ball with hook Mass: 1040g&plusm...
Test Device For The Impact Performance Of Shot Bag
Test Device For The Impact Performance Of Shot Bag Test Device For The Impact Performance Of Shot Bag Function: Determining the resistance of glazing material to impact by the penetration method. Pr...
Food Packaging Aluminum Cover Sheet Metal Drawing Processing
Food Packaging Aluminum Cover Sheet Metal Drawing Processing Food packaging aluminum coverSheet metal drawing processingAluminum sheet stamping and drawingMaterial: Aluminum plate 3003Thickness: 0.3mmSize: &P...
All supplier products

Same products

Falling Ball Impact Testing Apparatus for safety Glass
Falling Ball Impact Testing Apparatus for safety Glass Seller: Qinhuangdao Yuanchen Technology Equipment Co., Ltd. Falling Ball Impact Testing apparatus Function: Determination of whether the safety glazing mater...
KRD30-10 Centrifugal Constant Acceleration Tester (Box Type)
KRD30-10 Centrifugal Constant Acceleration Tester (Box Type) Seller: CME Technology Co., Ltd. KRD30 series box-type centrifugal constant acceleration testing machine is used to determine that...
KRD42 Double lift zero-distance drop tester
KRD42 Double lift zero-distance drop tester Seller: CME Technology Co., Ltd. KRD42 series drop tester, mainly simulates the resistance to drop and impact of large and heavy p...
KRD17 Pneumatic Bidirectional Vertical Shock Test System
KRD17 Pneumatic Bidirectional Vertical Shock Test System Seller: CME Technology Co., Ltd. KRD17 series pneumatic bidirectional vertical shock test system is the new designed and developed...
KRD32 Non-standard Centrifugal Constant Acceleration Tester
KRD32 Non-standard Centrifugal Constant Acceleration Tester Seller: CME Technology Co., Ltd. KRD32 series non-standard centrifugal constant acceleration testing machine is test equipment for...