ANSI Impact Safety Glass Test Equipment
Impact Testing Equipment
Testing Machine for Mechanical Properties of Tempered Glass
Shot Bag
1)Weight:45kg±0.1kg 46kg±0.1kg
2)Height: 330mm± 13mm
3)Max diameter:250mm
4)Lead sand size: 2.5mm
Pneumatic Tyres Impactor
Pneumatic Tyres Device for Pendulum Test of Glass In Building According to BS EN 12600
Reference standard:
BS EN 12600:2002
Glass in building - Pendulum test - Impact test method and classification for flat glass
MS 1498:2017
Safety glass in building - Specification
Technical Parameters:
Weight 50 kg ± 0.1 kg
Tire pressure: 0.35Mpa ± 0.02Mpa
Type: 3.50-R8 4PR
Impact Frame
Test Frame:
Frame Size: 1900mm*1500mm*3570mm
Samples Size: 1930mm*864mm
Lift: Electric
Release: Auto
Maximum impact height: 1200mm (customized)
Rubber Pad Width: 15mm
Rubber Pad Thickness: 3mm
Rubber Pad Hardness: Shore A50
Drop Ball Impact Test Machine
Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object
Hardness steel ball:
a) 2260g ± 20g, diameter of approximately 82.5mm
b) 227g ± 2g, diameter of approximately 38 mm
c) 1040g ± 10g, diameter of approximately 63.5 mm
d) 508g±3g, diameter of approximately 50 mm
Frame Height: 1000mm, 5000mm, 12000mm, Customized
Automatic release and lift. Power: 220V 50Hz 580W
Supporting fixture:
a) Support Size: 350mm*350mmand 660mm*660mm (Customized)
b) Frame width 15mm
c) Steel box height 150mm
d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50
e) Interposed sheet of rubber: thickness 3mm, hardness shore A50
Applied Test Pieces Size: 300mm*300mm 610mm* 610mm
Head-form Test Device
Head Weight: 10kg Head Size: 500mm*932mm Impact height: < 1.5m Samples size: 1100mm*500mm Felt hat: 90g/89mm/3mm Frame size: 1400mm*666mm*320mm
Safety Glass testing Equipment:
Portable on-site Comprehensive Measurement Instrument for Energy-saving Glass
It is applicable to the field test for opt thermal parameters of energy-saving glass installed and or to be installed
The data that the instrument can measure is: thermal parameters, optical parameters, light transmittance, light reflectance, shading coefficient, U value, LSG, Low-E position, E value, space thickness, overall thickness, glass thickness
The types of glass that the instrument can measure are:
Single pane, Laminated glass, Uncoated insulated glass, Coating on both sides and below, Coating on more than two sides, Coating on both sides and below, Coating on more than two sides, Vacuum glazing
Pummel Test Device:
Hammer head diameter: 30mm
Impact Distance: Adjustable
Shot Bag Impact Testing Frame:
Shot Bag 45kg/46kg
Automatic Release
Electric Lifting
Pneumatic Clamping
PV Load Test Equipment
Size: 6425mm*2000mm*3490mm
Samples: 1643mm*991mm~2009mm*1027mm (Customized)
Source: Sandbag
Load: 2400Pa 5400Pa 8100Pa 10000Pa (Customized)
Pneumatic Tyres Device
Weight 50 kg ± 0.1 kg
Tire pressure: 0.35Mpa ± 0.02Mpa
Type: 3.50-R8 4PR
Forced Entry Resistant Glass Test Device
Axe: 810mm Long
Axe Quality: 1.80kg
Sample size: 610mm*610mm
Insulating Glass Dew Point Meter
Operating temperature: -80°C ~ 100°C
Tube height: 300mm
Tube diameter: 50mm
Temperature resolution: 0.1 °C
Hard/Soft Pendulum Shock Test for Lifts
Hard pendulum shock device
Height: 330± 15mm
Max diameter: 240±10mm
Weight: 10kg ± 0.1kg
Material: according to ISO standard
Filler: 3.5mm 0.25mm
Soft pendulum shock device
Height: 330mm ± 15mm
Maximum diameter: 240mm±15mm
Weight: 45kg ± 0.5kg
Material: leather bag
Filler: diameter 3.5mm ± 1mm lead sand
Boiling Test Device
Power: 220V 50Hz 3Kw (Customized)
Outside Size: 400mm*255mm*480mm
Inside Size: 400mm*255mm*480mm
At most 6 samples with 300mm*300mm
Tempered Glass Flatness Measuring Instrument
Measurement of arcuate form and wave form of toughened glass
Resolution: 0.01mm
Measuring Span: 300mm-12000 mm ( Customized)
Impactor for building Glass and Metal Guardrail
Impact Steel ball
Weight: 1040g ± 10g
Dia: 63mm
Shot bag impactor
Data:
Weight: 45kg ± 0.1kg
Height: 330mm ± 13mm
Max diameter: 250mm
Material: leather bag filling lead shot
Leather thickness: 0.15mm
Lead sand size: 2.5mm
Hard and Soft Body Impactors for Opaque Wall Components
Soft body:
Weight: 50kg
Dia: 400mm
Conical canvas bag filles with 3mm glass sphere
Hard Body:
Steel Ball 0.5 kg/50mm
Steel Ball 1 kg/62.5mm
在线联系供应商
Other supplier products
 |
门锁用不锈钢冲压件 | 五金冲压件 不锈钢钣金加工件 家居冲压件 名称：门锁片 材质：不锈钢304 厚度：1.5mm 表面：工业面 尺寸：230mm*38mm*6mm 重量：70g 工序：激光切割 折弯 用途：整樘门门锁 家居五金 |
 |
ISO 3537 人头模型用毛毡帽 | 名称：毛毡帽 材质：羊毛毡 半径：95 mm 厚度：5 mm 功能：用于人头模型，以评定安全玻璃在受到钝物，大体积物体的冲击下的最小强度和内聚力。 参照标准：GB/T 5137.1 汽车安全玻璃试验方法第1部分：力学性能试验 GSO ISO 3537-1998 机动车辆 &ndas... |
 |
不锈钢镜面支架 | 不锈钢支架 焊接镜面支架 不锈钢钣金加工定做支架 尺寸：67mm * 48mm×50mm材质：不锈钢表面：镜面重量：1.42公斤 |
 |
人头模型试验装置 ISO 3537 | 汽车玻璃人头模型 汽车玻璃检测设备 安全玻璃材料力学试验设备 汽车玻璃人头模型 汽车玻璃检测设备 安全玻璃材料力学试验设备 参照标准： GB/T 5137.1汽车安全玻璃试验方法第1部分：力学性能试验 GSO ISO 3537-1998机动车辆-安全玻璃材料力学试验 试验目的：评价在钝物冲... |
 |
Hard and Soft Pendulum Shock Device for Lifts | Hard and Soft Pendulum Shock Device for Lifts Related Standard: GB 7588-2003 Safety rules for the construction and installation of electric lifts ... |
Same products
 |
RAW900 高精度水分活度仪 | 卖方: 青岛瑞迪仪器有限公司 | 1.产品概述： 本仪器是一款便携式的高精度水分活度仪，可以测量固体（粉末状、颗粒状、块状）、液体及糊状样品的水活度。主要用于反应平衡状态下的微生物能利用的或者能参与化学反应的有效水分、产品稳定性... |
 |
Digital Rail Head Wear Gauge | 卖方: 武汉联科瑞际轨道设备有限公司 | Rail wear gauge（rail head loss gauge also call it rail profile gauge）is mainly used to measure th... |
 |
SF6 Gas Density Monitor | 卖方: Lanso Instruments LLC. | As one of the professional gas pressure gauge manufacturers, Lanso is committed to offering SF6 g... |
 |
Pressure Transmitter | 卖方: Lanso Instruments LLC. | Lanso different pressure transmitterfeature compact structure and high accuracy, and can output s... |
 |
Pressure Measurement Gauge | 卖方: Lanso Instruments LLC. | Lanso, as a professional oil pressure gauge manufacturers& supplier, keeps on providing our c... |
