Leather Freezing Flexing Tester
Introduction
LeatherFreezingFlexing tester is used for testing the upper leather, synthetic leather and other cold level, in order to fully understand the material or finished products to adapt to low temperature climate or cold areas of performance. The instrument is made of stainless steel and can be equipped with a variety of anti-fixture, and is applicable to different test requirements.
Applications
LeatherFreezingFlexing tester is used for testing the upper leather, synthetic leather and other cold level, in order to fully understand the material or finished products to adapt to low temperature climate or cold areas of performance.
Standards
ASTM D1790 Standard test method for brittleness temperature of plastic sheeting by impact
ASTM D1593M
JIS K6545 Testing method for flexing endurance of light leathers and their surface finishes
Accessories
Optional inner box action:
A. Upper material low temperature flexion fixture:
●Number of groups: 6
●Test frequency:1.5±0.1HZ
●Fixture V-shaped angle：40°±1°
●Fixture V - shaped top - end curvature radius 6.4mm
●Two fixture farthest distance: 28.5 + 1.0mm
●Two fixture nearest distance: 9.5 + 1.5mm
B. Upper material low temperature flexion fixture:
●Number of groups: 12
●Test frequency:100±5 times/min
●Flexing angle:22.5°±0.5°
Other supplier products
|
|
Fiber Blend Ratio Tester |
Product Introduction:
It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the sp... |
|
|
Electric bicycle chassis performance dynamometer |
Meet the standard:
EN 15194
ISO 4210
UL 2849
Product Introduction:
Electric bicycles are complex systems involving mechanical, electrical, and... |
|
|
Coatings Shear Fatigue Tester |
Standard
YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings on metallic substrates, including load ratios, frequenc... |
|
|
Dry Microbial Penetration Resistance Evaluation Tester |
DryMicrobial Penetration Resistance Testeris designed to determine determine the penetration resistance of material to bacterial on dry particulate... |
|
|
Coating Shear Strength Tester |
Standard
YY/T 0856-2011 (China): Specifies mechanical testing protocols for metal angular fixators, including single-compression bending and bendi... |
All supplier products
Same products
