Leather Freezing Flexing Tester
Introduction
LeatherFreezingFlexing tester is used for testing the upper leather, synthetic leather and other cold level, in order to fully understand the material or finished products to adapt to low temperature climate or cold areas of performance. The instrument is made of stainless steel and can be equipped with a variety of anti-fixture, and is applicable to different test requirements.
Applications
LeatherFreezingFlexing tester is used for testing the upper leather, synthetic leather and other cold level, in order to fully understand the material or finished products to adapt to low temperature climate or cold areas of performance.
Standards
ASTM D1790 Standard test method for brittleness temperature of plastic sheeting by impact
ASTM D1593M
JIS K6545 Testing method for flexing endurance of light leathers and their surface finishes
Accessories
Optional inner box action:
A. Upper material low temperature flexion fixture:
●Number of groups: 6
●Test frequency:1.5±0.1HZ
●Fixture V-shaped angle：40°±1°
●Fixture V - shaped top - end curvature radius 6.4mm
●Two fixture farthest distance: 28.5 + 1.0mm
●Two fixture nearest distance: 9.5 + 1.5mm
B. Upper material low temperature flexion fixture:
●Number of groups: 12
●Test frequency:100±5 times/min
●Flexing angle:22.5°±0.5°
Другие товары поставщика
|
|
Geosynthetic Transmissivity Tester |
Scope of application:
It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s... |
|
|
Fire retardant coating tester |
Product Introduction:
The tester conforms to the technical indicators and requirements specified in the national standard GB12441-2005. and is sui... |
|
|
Safety hat antistatic performance tester |
Product Introduction:
Safety hat anti-static performance tester according to the new national standard GB/T 2812-2006 "Safety hat test Method", GB... |
|
|
Sharp edge meter |
Standards :
ASTM F963 4.8. EN71-1998 8.14. GB6675-2003 A.5.9. 16CFR 1500.48
Basic Configuration：
Sharp Edge Tester: 1 unit
Foot switch: 1 set
... |
|
|
Reciprocating Wear Tester |
Standards
ASTM F2496: Scratch hardness and adhesion testing for prints/coatings.
ISO 1518-1 & -2: Scratch resistance determination for pain... |
Все товары поставщика
Похожие товары
