.

Scratch-resistance testing machine for low voltage wire and cable for road vehicles

Product Introduction:

Low voltage wire and cable scratch-resistance tester for road vehicles is a device used to scratch the insulating surface of automobile wires to determine the wear resistance of automobile wires

Applicable standards:

JB/T 8139-1999, JIS C3046, JASO D 611 standards

Main parameters:

1) The scraping device moves bidirectional along the wire axis with a stroke greater than 10mm

2) Movement frequency :50——60 cycles/minute

3) Count :4 digits

4) Test times :4 times

5) The minimum distance between the test points and the test point and the sample end is greater than 10mm, and the sample rotation Angle :90°

6) Sample length: about 750mm sample firmly fixed on a steel anvil

7) Weight :500, 750, 1000g, 1250g(weight applied to the scraper)

8) Functional: When the needle wears through the insulation and conductor contact, the equipment will stop


Send product request

To: Qinsun Instruments Co., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Electrode tortuosity tester & diaphragm ion conductivity tester
Electrode tortuosity tester & diaphragm ion conductivity tester Standard Electrode Tortuosity Analyzer: ASTM E1970-21 (Electrochemical Impedance Spectroscopy) ISO 18516 (Conductive Coatings – Resistivit...
Adiabatic Accelerated Calorimeter
Adiabatic Accelerated Calorimeter Product Description Adiabatic Accelerated Calorimeter determines the thermal behavior of samples under adiabatic conditions by keeping the tempe...
Collection of needle rubber sleeve resilience tester
Collection of needle rubber sleeve resilience tester Product introduction   The collection needle rubber sleeve resilience tester evaluates the force measured by the collection tube when it passes...
G234 Bed Blanket Flammability Tester
G234 Bed Blanket Flammability Tester The test instrument is used to detect the flame resistance of the blanket fabric and the flame spread performance of the fabric surface. The test m...
Cell thickness gauge
Cell thickness gauge Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 3611: Calibration of Measuring Instrument...
All supplier products

Same products

Reliable Components for Water and Industrial Systems
Reliable Components for Water and Industrial Systems Seller: 866507 The Stainless Steel Float Ball is designed for automatic liquid level control and fluid managem...
Double Convex Lenses
Double Convex Lenses Seller: Shandong Yanggu Constant Crystal Optics, Inc Double Convex Lensesare used in image relay applications, or for imaging objects at close conjuga...
Wedge Prism
Wedge Prism Seller: Shandong Yanggu Constant Crystal Optics, Inc Wedge prismis an optical element with plane-inclined surfaces, usually the faces are inclined tow...
Ball Lenses
Ball Lenses Seller: Shandong Yanggu Constant Crystal Optics, Inc Ball Lensesare commonly used to improve signal quality in fiber coupling applications, or for use...
KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery
KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery Seller: Xin Tang Shallow Power Supply Co.,LTD KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery Small Office & Retail UPS Backup Power Systems...