Automotive wire cyclic bending testing machine
Standard
This testing machine aligns with global automotive industry standards for wire harness reliability, includingISO 6722(Road vehicles – Cables for conductor sets) andSAE J1128(Low-voltage battery cable specifications). By simulating repetitive bending stresses, it evaluates wire fatigue resistance under dynamic conditions, ensuring compliance with OEM specifications for in-vehicle wiring durability.
Product Advantages
- Versatile Angle Adjustment: Swings up to 180° bi-directionally or any user-defined angle, accommodating sharp-bend (e.g., R3.75) and gradual-curve testing scenarios.
- Triple-Station Efficiency: Three independent test channels enable parallel testing of different wire specifications, tripling throughput compared to single-station machines.
- Precision Fatigue Analysis: ±1 cycle/min speed control and 6-digit counter ensure accurate life-cycle prediction, critical for validating warranty periods.
- Adaptive Fixture System: Interchangeable R-angle fixtures (R3.75, R7.2, R9.6, etc.) cater to wires from thin gauge (0.5mm²) to heavy-duty cables, eliminating costly retooling.
- Safety & Data Integrity: Automatic stop-on-break function prevents post-failure damage, while memory retention resumes testing after power interruptions.
Product Features
- Dynamic Swing Mechanism: 180° rotation with adjustable angles (1° increments) via digital control panel.
- Variable Speed Control: 10–60 cycles/minute operation with real-time speed display and over-speed protection.
- Modular Test Stations: Three channels with individual start/pause controls and LED status indicators.
- Load Configuration: Four precision weights (2.5N, 3.75N, 5N, 7.5N) for simulating varying vibration/flexure stresses.
- Diagnostic Capabilities: Built-in 24V test voltage output for continuity monitoring during bending cycles.
- Robust Construction: 50KG steel frame with vibration-damping feet ensures stable operation at maximum load.
Technical Parameters
| Parameter | Specification |
|---|---|
| Swing Angle Range | 0°–180° (CW/CCW), adjustable in 1° increments |
| Operating Speed | 10–60 cycles/min (±1 cycle tolerance) |
| Cycle Counter | 1–999,999 counts (presettable with pause/resume) |
| Test Stations | 3 independent channels with quick-release fixtures |
| Applied Loads | 2.5N, 3.75N, 5N, 7.5N (interchangeable weights) |
| Fixture R-Angle Options | R3.75, R7.2, R9.6 (customizable per AWG/mm²) |
| Test Voltage | 24V DC (built-in supply) |
| Power Input | AC 220V ±10%, 50/60Hz (switchable to DC 24V/5A) |
| Machine Dimensions (W×D×H) | 600 × 450 × 750 mm |
| Net Weight | 50 kg |
Send product request
Other supplier products
 |
Residual Ethylene Oxide Gas Chromatographic Analyzer | The ethylene oxide residual gas chromatograph is a professional analytical instrument for detecting the residual amount of ethylene oxide in medica... |
 |
Car seat foam performance tester | Applicable standards: GB/T 6670-2008"Determination of falling ball resilience of soft foam polymeric materials" : This standard specifies the test... |
 |
Geotextile wear tester | Scope of application: The wear resistance of geotextile and its related products was measured by emery cloth-sliding block method. During the expe... |
 |
Bentonite waterproof blanket permeability tester | Scope of application: Used to determine the permeability coefficient of bentonite waterproof blanket under specified pressure and time conditions.... |
 |
Room Temperature Dyeing Machine STD-AC16 | PRODUCT DETAIL STD-AC16-Room Temperature Dyeing Machine Application Of Room Temperature Dyeing Machine Room Temperature Dyeing Machine suitable for... |
Same products
 |
PH-A6 Waterproof Pen-Style High-Precision pH/Temperature Meter | Seller: Kelilong Electron Co.Ltd | Deeply cultivating water quality testing for 36 years, creating a portable and precise testing to... |
 |
PH-A6 Waterproof Pen-Style High-Precision pH/Temperature Meter | Seller: Kelilong Electron Co.Ltd | PH-A6 Waterproof Pen-Style High-Precision pH/Temperature Meter 36 years of deep cultivation in t... |
 |
PH-9082 Waterproof Pen-Style High-Precision pH/Temperature Meter | Seller: Kelilong Electron Co.Ltd | Core Positioning: Cost-effective professional-grade tester. With professional configuration + lon... |
 |
Battery Powder Compaction Density Evaluation System | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application (1) Measurement of tapped de... |
 |
Lingfeng (LF) Air-Cooled Integrated Refrigeration Chillers | Seller: Beijing Linggong Technology Co., Ltd. | TheLingfeng(LF)Air-Cooled IntegratedRefrigerationChillersis a professional refrigeration equipmen... |
