Nonwovens liquid loss tester
Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric materials for a specific test fluid slip and loss of performance. Standards compliant: Edana152.0-99; ISO9073-11 The main purpose: Non-woven fabric liquid loss tester _ liquid slip and loss of the tester built-in loss of Taiwan and sample fixture for non-woven fabric materials for a specific test fluid slip and loss of performance. The main parameters ： 1, flow control range: 6.10mL / s ~ 6.41 mL / s; 2, slip and drain Taiwan angle control: 25 °; 3, slip and loss length: 250 ± 0.2mm; 4, timing: 60s, accuracy: ± 0.1s; 5, slip and loss Weight: 30g ± 0.01g. Main features of the fabric liquid loss tester: 1, with the requirements of the requirements of the loss of Taiwan and sample fixture; 2, having a dose device capable of giving a 25 mL test solution in a continuous stream within (4 ± 0.1) s; 3, the test liquid out of time manual operation, automatic recording, digital display; 4, can be equipped with loss of weighing system. Test principle: A standard absorbent medium is placed under the nonwoven fabric to be measured and the combined sample is placed on a sloping pad to measure that when a particular amount of artificial urine flows down to the combined sample, the liquid penetrates the nonwoven Standard Absorbent Media Absorption, the liquid loss performance of the nonwovens sample was obtained by weighing the weight of the mass of the media prior to testing.
Other supplier products
|
|
Spray Rating Tester |
Spray Rating Tester
Testing Standards:
ISO 4920, BS EN 24920, BS 3702, GB/T 4745, AATCC 22, M&S P23, NEXT 23
Applications:
Spray Rating T... |
|
|
Metal ring friction and wear testing machine |
Evaluate the wear resistance of the material:
By simulating the friction process, real-time monitoring of friction, temperature, wear and other pa... |
|
|
Coatings Shear Fatigue Tester |
Standard
YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings on metallic substrates, including load ratios, frequenc... |
|
|
Spectral Density Analyzer |
Standard
The SpectroDensitometer YD5000 complies with international standards includingISO 5-4.CIE No.15. andISO 13655. ensuring reliable and stan... |
|
|
Carpet Wear Resistance Analyzer |
Standard
ASTM D4157(Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method))
ISO 12947-2(Textiles - Deter... |
All supplier products
Same products
