Nonwovens liquid loss tester
Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric materials for a specific test fluid slip and loss of performance. Standards compliant: Edana152.0-99; ISO9073-11 The main purpose: Non-woven fabric liquid loss tester _ liquid slip and loss of the tester built-in loss of Taiwan and sample fixture for non-woven fabric materials for a specific test fluid slip and loss of performance. The main parameters ： 1, flow control range: 6.10mL / s ~ 6.41 mL / s; 2, slip and drain Taiwan angle control: 25 °; 3, slip and loss length: 250 ± 0.2mm; 4, timing: 60s, accuracy: ± 0.1s; 5, slip and loss Weight: 30g ± 0.01g. Main features of the fabric liquid loss tester: 1, with the requirements of the requirements of the loss of Taiwan and sample fixture; 2, having a dose device capable of giving a 25 mL test solution in a continuous stream within (4 ± 0.1) s; 3, the test liquid out of time manual operation, automatic recording, digital display; 4, can be equipped with loss of weighing system. Test principle: A standard absorbent medium is placed under the nonwoven fabric to be measured and the combined sample is placed on a sloping pad to measure that when a particular amount of artificial urine flows down to the combined sample, the liquid penetrates the nonwoven Standard Absorbent Media Absorption, the liquid loss performance of the nonwovens sample was obtained by weighing the weight of the mass of the media prior to testing.
Other supplier products
|
|
Thrust Washer Friction Testing Machine |
Applicable standards
When the end face rotary friction and wear testing machine is tested, it is usually necessary to follow certain standards and... |
|
|
Leather Water Vapor Permeability Tester |
Productinformation
The vaporpermeability of leather is evaluated by means of measuring the weight of water-vapor that permeates to specimen peruni... |
|
|
Negative pressure tester for medical syringes |
Main use
The negative pressure tester is mainly used to test the physical characteristics of the body
of the syringe, and is one of the impor... |
|
|
Paper whiteness tester |
Product Introduction:
Paper whiteness tester is suitable for the whiteness measurement of non-color surface flat objects or powders, and can accur... |
|
|
Safety Helmet Chin-strap Strength Tester |
Standard
GB/T 2812-2006: Safety Helmets
GB/T 2811-2019: Head Protection – Vocabulary and Test Methods
Equivalent Compliance: ISO/EN 397 (I... |
供应产品
Same products
