Geotextile equivalent aperture tester (dry sieve method)
Scope of application:
The equivalent pore diameter of geotextile and its related products was determined by dry screening method. The geotextile sample is used as the screen cloth, the standard particle material with known diameter is placed on the geotextile above the vibrating screen, and the sieve rate is calculated by weighing the standard particle material weight of ten industrial cloth, and the sample is replaced by the standard particle material with different diameters. The aperture distribution curve of the textile is drawn and the value of 090 is obtained.
Meet the standard:
GB/T14799-2005,ASTM D4751-2004,JTG E50 T1144-2006,SL/T 235-7-2012, etc
Instrument features:
Adopts split type design to avoid damage to the control system caused by vibration during high-speed operation.
Using mechanical vibrating screen vibration, smooth and efficient;
Vibrating screen can carry out shaking and shaking two vibration modes, vibration frequency is stable;
Equipped with locking protection device, strengthen the stability of the fuselage;
It is equipped with an anti-static device to prevent glass beads from gathering on the surface of the sample due to electrostatic action;
+5 sets of sieve parallel sample test, energy saving and high efficiency;
Digital display time, vibration time can be set;
Easy to install, easy to operate.
Technical parameters:
The inner diameter of the screen is 200mm
The screen is made of aluminum
Screen stack height 400mm
Screen seat amplitude 8mm
Vibration frequency 221/min
Vibration frequency 147/min
Turning radius 12.5mm
The timer ranges from 0 to 99 minutes and 59 seconds
Power supply AC 380V 50HZ
Dimensions Host :600x380x1000mm
Control box :330x290x105mm
Weight 130kg
Send product request
Other supplier products
 |
Dry Sand Rubber Wheel Wear Tester | Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi... |
 |
Shoe stripping tester | Main uses: The shoe stripping tester is mainly used to measure the bonding strength between the upper and the sole or other shoe components. By si... |
 |
G234 Bed Blanket Flammability Tester | The test instrument is used to detect the flame resistance of the blanket fabric and the flame spread performance of the fabric surface. The test m... |
 |
PV Hail Impact Tester | Standard Compliance IEC 61215: Mechanical load testing for terrestrial photovoltaic modules. UL 61730: Safety standards for photovoltaic modules ... |
 |
Sulfur Dioxide and Hydrogen Sulfide Corrosion Test Chamber for Automotive Connectors | Meeting Standards: Carry out various sulfur dioxide gas corrosion tests in accordance with GB10587 - 89, GB2423.9 - 93, GJB150, QC/T417.1 - 2001 a... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | Seller: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM Card Tester is used to detect SIM card circuits and supports dual-SIM detection ... |
 |
HCV1500 High-precision Voltage Sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500 high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and vari... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
