Forging Parts
Unidus forging factory has a complete production equipment and technology,Website:, a production capacity of 30,000 ton per year. Main products are petroleum machinery、I—IV type pressure vessel forging pieces for chemical industry、power station、shipping、aviation、nuclear power and all kinds of engineering machinery forgings. The shape of the products are: rotor shaft、producing all kinds of forging according to the standard of home and abroad, such as flange、wellhead equipment and valves which are used in oil production equipment 、tube forging.A broad range of forging materials GB standard carbon steel、alloy steel、heat resistance stainless steel and the ultra-low carbon stainless steel and so on. We also produced a batch of forging pieces according to the United States and the European standard material forgings. Has a mature production of A105 、 A266 、 A350 、 4130 、 4140 、 4340 、 F5 、 F11 、 F22 、 F51 、 F53 、 F91 、 F92 、 F304 （ L ）、 F316 （ L ）、 F321 （ L ） and other forgings according to the standard of ASME、ASTM. Mature Europe standard products are mainly: S235 、 S355 、 16Mo3 、 C422 and other carbon steel alloy steel, stainless steel forgings according to the standard of EN10025 、 EN10083 、 EN10084 、 EN10250 、 EN10283 、 EN10088 、 EN10095 and so on. With a significant feature of strong focus on researching to peer, in heat treatment section the company equip with micro-furnace, carry out experiment to new products and new materials then study its heat treatment process. At the same time, we cooperate with iron smelting company to study the Physical and Mechanical Properties of steel, reasonable mix of components. Especially for duplex stainless steel, super austenitic stainless steel, control and reasonable mix of components is very important, and it is crucial to structure control and mechanical properties. After a long-term exploration research, in the field of nuclear power and aviation, there are special requirements for those special material, we have a lot of valuable experience in the process of forging and heat treatment.In the forging process, after many years of trial practice, the company has formed a complete set of technical process from the raw materials, heating, forging to heat treatment. Especially the high-temperature alloy steel forging, our forging parts NiCr20TiAl, the content of Ni up to 65%, and its forging is very difficult. Now, the high-temperature alloy product forged by us has successfully taken place of imported products.
Other supplier products
|
|
Ferritic Stainless Steel Pipe |
Ferritic Stainless Steel PipeFerritic stainless steel is a class with a body centered cubic structure,Website:, containing carbon is equal to or le... |
|
|
Honed Tubes For Hydraulic Cylinders |
Honed Tube,Website:, with standard DIN2391,EN10305-1/2,GB/8713,we manufacture from OD40mm to 800mm and length 14meter max. Our yearly capacity is 1... |
|
|
Austenitic Stainless Steel Pipe |
Austenitic stainless steel is stainless steel in high temperature and room temperature. The Ni,Website:, 8%~10% Cr and C about 0.1%, with a stable ... |
|
|
Super Duplex Stainless Steel Pipe |
(Super) Duplex Stainless Steel PipeDual phase stainless steel with α +γ dual phase structure,Website:, so the characteristics of the performance ch... |
|
|
Drawn Over Mandrel Tubes |
Drawn Over Mandrel Tubes (DOM)Drawn Over Mandrel tubes according to tubing manufacturing standards like ASTM A513 type-5 & -6 or equivalent to meet... |
All supplier products
Same products
