PRECISION ERW Tube
Electric Resistance Welding TubingUnidus Tube&Supply can supply ERW tubes according to tubing manufacturing standards like ASTM A513 type-1 & -2 or equivalent to meet customers requirements. ERW tubing can be an ideal choice for structural applications,Website:, where dimensional tolerances are not critical. This tubings with appropriate modifications in mechanical properties can be used for bending, flattening, flaring or other types of fabrication applications. ERW tubing is available in a wide range of wall-to-diameter ratios and can be manufactured from Hot rolled/ Cold rolled steel.Manufacturing procedureTubes are manufactured from mild steel strips slitted from Hot Rolled Low Carbon Steel coils. The strip passes through a series of drive forming and fin rolls and takes the required circular shape and is welded continuously by passage of an electric current of high frequency.AdvantagesDue to its excellent workability, scrap loss is minimal. Due to its uniformity and concentricity, lighter walls can be specified, reducing the allowance for stock removal.StandardsASTM A513 Type 1 Hot Rolled Electric-Resistance Welded (ERW) Carbon Steel Mechanical Tubing ASTM A513 Type 2 Cold Rolled Electric-Resistance Welded (ERW) Carbon Steel Mechanical Tubing
Other supplier products
|
|
Super Austenitic Stainless Steel Pipe |
Super Austenitic Stainless Steel PipeWhen cr-ni austenitic stainless steel pitting resistance equivalent value (PREN = 3.3 [Mo] [Cr] + + 16 [N]) & ... |
|
|
Aluminium Tube |
Aluminium Tubing The properties of aluminum that make it so attractive include strength,Website:, light weight, fabricability and corrosion resista... |
|
|
U BEND TUBE For Heat Exchanger |
U-Bend TubeU-bend tubes are widely used in heat-exchanger systems. Heat-exchanger equipment on the basis of seamless stainless U-tubes is essential... |
|
|
HFW Finned Tube |
Unidus can supply either solid or serrated welded finned tubes.These tubes are manufactured specifically to suit the high temperature environment f... |
|
|
Honed Tubes For Hydraulic Cylinders |
Honed Tube,Website:, with standard DIN2391,EN10305-1/2,GB/8713,we manufacture from OD40mm to 800mm and length 14meter max. Our yearly capacity is 1... |
All supplier products
Same products
