Low Voltage Insulator Pins
1.Technical Parameters and DrawingsHE CodeDimensionsWt.ForABCDEFdkgcrossarmIPDL5/8-15 3/4"5"2"1 3/4"1"3"5/8"0.816woodIPDL5/8-25 3/4"6"2"1 3/4"1"3"5/8"0.835woodIPDL5/8-35 3/4"7 7/8"3"1 3/4"1"3"5/8"1.315woodIPDL5/8-46 1/2"5"2"1 3/4"1"3"5/8"0.871woodIPDL5/8-56 1/2"6"2"1 3/4"1"3"5/8"0.889woodIPDL5/8-67 3/4"7 7/8"3"2"1"3"5/8"1.542woodIPDL3/4-16 1/2"6"2 1/2"2"1"3 1/4"3/4"1.197woodIPDS5/8-11 1/2"5"2"1 3/4"1"1 1/4"5/8"0.562steelIPDS5/8-21 1/2"6"2"2"1"1 1/4"5/8"0.617steelIPDS3/4-11 3/4"6"2 1/2"2"1"1 5/8"3/4"0.835steel1. Tolerance: ±5% 2. All dimensions are in inch.3. Material: carbon steel 4. Finish: hot dip galvanized 5. Customized sizes are available at request.2.Product Description:Distribution low voltage insulator pins are produced from carbon steel SAE 1010 to 1020, all one-piece forgings, hot dip galvanized to ASTM A-153.Long shank pins are assembled with square nut, square washer and MF lock nut, for use on wood crossarms.Short shank pins are with spring washer and square nut only, for use on steel crossarms.Wrenching shoulder is in sqaure shape to allow rotating the insulator groove into position.Broad bases of the pins are to distributes tension and rest evenly on arms to provide a firm seat.Pins are available in both nylon alloy threads and lead threads.T he above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: low voltage insulator pins, distribution insulator pins, low voltage forged steel pins, lead thread crossarm insulator pins, long shank crossarm pinsHS code: 73269090Model: ANSI/ASMEPackage: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: carbon steelFinish: HDGODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Minimum tensile strength lbs.: Lead thread in: 1,etc.Shank dia. in: 5/8, 3/4Shank length in: 5 3/4, 6 1/2,etc.
Other supplier products
|
|
Spring Clip Washers |
1.Technical Parameters and Drawings HE CodeDimensionsWt./1000Hole dia.LengthBolt dia.kgSCW1/29/16"2 1/2"1/2"104.33SCW5/811/16"3 3/4"5/8"453.59SCW3... |
|
|
Alley Arm Braces |
1.Technical Parameters and DrawingsHE CodeCBA2337Notes:1. Tolerance: ±5% 2. All dimensions are in mm.3. Material: carbon steel 4. Finish: hot dip g... |
|
|
Double End Rods |
1.Technical Parameters and DrawingsHE CodeDimensionsMin tensile strengthWt.LDlbskgDER5/8-1212" (305)5/8" (16)124000.617DER5/8-1414" (356)5/8" (16)1... |
|
|
Yoke Plates |
1.Technical Parameters and DrawingsHE CodeDimensions(mm)Wt.Rated failure loadD1D2ALΦR1ΦR2(kg)(kN)YPL.43100YPL.66120YPL.8160YPL.9200YPLYPL.8200YPLYP... |
|
|
Thimbleye Anchor Rods |
1.Technical Parameters and DrawingsHE CodeSizeDimensions(mm)MDLTART5/8-15005/8×15005/8"14.2±0.31500102ART5/8-18005/8×18005/8"14.2±0.31800102ART5/8-... |
All supplier products
Same products
