4-Way Adjustable Pole Bands
2.Technical Parameters and Drawings HE CodeDescriptionDimensionsWt.Steel sizeFor pole dia.RodSquare holekgPBF-14 way pole band5/16"×3"6" - 10 1/2"3/4"×6"9/16"7.144PBF-24 way pole band1/4"×4"7 1/2" - 12"3/4"×6"9/16"5.634PBF-34 way pole band1/4"×4"8" - 12"3/4"×6"9/16"6.074PBF-44 way pole band1/4"×4"11" - 16"3/4"×6"9/16"7.915PBF-54 way pole band1/4"×4"9 1/2" - 16"3/4"×8"9/16"12.791Notes:1. Tolerance: ±5% 2. All dimensions are in Inch except for marked. 3. Finish: steel hot dip galvanized per ASTM A153 4. Customized sizes are available at request.2.Product Description:4-way adjustable pole bands, used on wood and concrete poles, work as a shield wire support and anti-split device, designed for conductor and guy attachments, fitting for various line angle attachments . The band sections are provided with a bonding hole to facilitate grounding.Square holes in each band section are for accommodation either lag screws or a ground connector.Pole bands are produced in carbon steel SAE 1010 to 1020, hot dip galvanized to ASTM A-153.Pole bands are supplied with 4 double arming bolts and 16 square nuts, shipped unassembled.9/16" square hole for 1/2" lag screw.The above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: 4 way adjustable pole bands, heavy pole bands, pole adjustable heavy style, adjustable pole bandsHS code: 7326909000Model: four wayPackage: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: ASTM A536Finish: hot dip galvanizedODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Lag hole dia. In: 9/16
Other supplier products
|
|
Double End Rods |
1.Technical Parameters and DrawingsHE CodeDimensionsMin tensile strengthWt.LDlbskgDER5/8-1212" (305)5/8" (16)124000.617DER5/8-1414" (356)5/8" (16)1... |
|
|
Service Mast Brackets |
1.Technical Parameters and Drawings
HE CodeDimensionsWt.Pipe dia.kgSMB-11 1/4" - 3"0.463Notes:1. Tolerance: ±5% 2. All dimensions are in In... |
|
|
Pole Eye Plates |
1.Technical Parameters and DrawingsHE CodeDescriptionPEP11/16Pole eye platesNotes:1. Tolerance: ±5% 2. All dimensions are in MM except for marked.... |
|
|
Guy Wire Thimbles |
1.Technical Parameters and DrawingsHE CodeDescriptionWt./1000kgGWT3/8Guy wire thimble 3/8"37.2Notes:1. Tolerance: ±5% 2. All dimensions are in MM ... |
|
|
Crossarm Corner Pins |
1.Technical Parameters and DrawingsHE CodeCCP-011. Tolerance: ±5% 2. All dimensions are in MM3. Material: carbon steel 4. Finish: hot dip galvani... |
All supplier products
Same products
