Ground Rods
1.Technical Parameters and DrawingsHE CodeDimensionsWt.Dia. inLength. ft.kgGR1/2-51/2"5'1.50GR1/2-61/2"6'1.79GR1/2-71/2"7'2.09GR5/8-65/8"6'2.72GR5/8-75/8"7'3.18GR5/8-85/8"8'3.63GR5/8-105/8"10'4.54GR3/4-63/4"6'4.08GR3/4-83/4"8'5.26GR3/4-103/4"10'6.62GR3/4-203/4"20'13.61GR1-81"8'9.98GR1-101"10'11.341. Tolerance: ±5% 2. All dimensions are in inch.3. Material: carbon steel 4. Finish: hot dip galvanized 5. Customized sizes are available at request.2.Product Description:Ground rods are produced to as an economical means of grounding. Cone shaped points at ends are designed for easy driving. Ground Rods are available with or without copper wire. Rods are made of high carbon, open-hearth steel for maximum strength, hot dipped galvanized to ASTM A153.The above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: earth rods, ground rodsHS code: 7318159090Model: ANSI/ASMEPackage: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: carbon steel Q235Finish: HDGODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Diameter in: 1/2, 5/8, 3/4, 1, 1,etc.Length ft.: 5, 6, 8, 10,etc.
Other supplier products
|
|
Drive Hooks |
1.Technical Parameters and DrawingsHE CodeDescriptionDimensionsWt./1000ΦDLTkgGH5/16Drive hook5/16"3 1/2"2"49.89GH3/8Drive hook3/8"4"2"58.97GH7/16Dr... |
|
|
Pole Top Pins |
1.Technical Parameters and DrawingsHE CodeDimensionsWt.ABCDkgPTP150115"5"4"1"1.31PTP180118"5"3"1"1.61PTP200120"5"3"1"1.80PTP200220"8"4"1"1.81PTP24... |
|
|
Low Voltage Insulator Pins |
1.Technical Parameters and DrawingsHE CodeDimensionsWt.ForABCDEFdkgcrossarmIPDL5/8-15 3/4"5"2"1 3/4"1"3"5/8"0.816woodIPDL5/8-25 3/4"6"2"1 3/4"1"3"5... |
|
|
Ball Eyes Extension Link |
1.Technical Parameters and DrawingsHE CodeDimensionsMinimum failing loadWt.ABCDEKNkgBEL.3BEL.3BEL.4Notes:1. Tolerance: ±5% 2. All dimensions are ... |
|
|
Secondary Rack Pole Bands Single Type |
1.Technical Parameters and DrawingsHE CodeDescriptionPBS-1Secondary Rack Pole Bands Single TypeNotes:1. Tolerance: ±5% 2. All dimensions are in MM... |
All supplier products
Same products
