Magnetic Bar
Magnetic BarMagnetic bar is used to separate very fine ferrous particles,Website:, ferrous chips and other ferrous material from solid, powder or liquid material flows. It is widely used in food industry, drug industry and chemicals industryFor round magnetic filter bar, the following diameters can be choiced by you: 0.5″ , 0.75″ , 0.875″ , 1″ , 1.25 ″, 1.5 ″, 1.75″ , 2″ , 3 ″, 4″ . The most common diameter is 1″ . The length range from 3 ″ to 60″ . Square magnetic bar can be provided as per the customer s requirements.The out tube is made by SS304 or SS316. The inside magnet is Ceramic or Rare Earth Magnet as per the customer s requirements on the magnetic force. The customers can build or modify their own magnetic separation equipment with individual magnetic bar.Magnetic strength from 1500 to 12000 gauss. For normal magnetic bar equipped with Ceramic magnets which could give typical peak value of more than 3000 gauss on the surfaces, and the maximum working temperature can reach 150 C. For normal magnetic bar equipped with Rare Earth Magnet, which coud give typica peak value of more than 12000 gauss on the surface.Fully seal welded with either plain ends or tapped ends to suit your application.All of magnetic filter bar are waterproof.Condition: Well polished.Some dimension of round vision of magnetic bar for your reference, other dimension (Diameter x Length) can be made as per the customer's requirements.Part NO.Diameter(mm)Length(mm)Part No.Diameter(mm)Length(mm)JXM-RJXM-RJXM-RJXM-RJXM-RJXM-RJXM-RJXM-RJXM-RJXM-RJXM-RJXM-RJXM-RJXM-RJXM-RJXM-RJXM-RJXM-RJXM-RJXM-RSome dimension of square vision of magnet bar for your reference, other dimension can be made as per the customer's requirements.Part No.Square(mm)Lengt(mm)Part No.Square(mm)Length(mm)JXM-S-25-10025 x 25100JXM-S-50-10050 x 50100JXM-S-25-20025 x 25200JXM-S-50-20050 x 50200JXM-S-25-30025 x 25300JXM-S-50-30050 x 50300JXM-S-25-40025 x 25400JXM-S-50-40050 x 50400JXM-S-25-50025 x 25500JXM-S-50-50050 x 50500JXM-S-25-60025 x 25600JXM-S-50-60050 x 50600JXM-S-25-70025 x 25700JXM-S-50-70050 x 50700JXM-S-25-80025 x 25800JXM-S-50-80050 x 50800JXM-S-25-90025 x 25900JXM-S-50-90050 x 50900JXM-S-25-100025 x 251000JXM-S-50-100050 x 501000JXM-S-25-150025 x 251500JXM-S-50-150050 x 501500
Other supplier products
|
|
Permendur 2V |
Permendur 2V/Hiperco 50AHigh Saturation magnetic induction soft magnetic alloys 1J22(GB/TPermendur 2V is high saturation magnetic induction strengt... |
|
|
High Temperature Ferrous Alloy |
High Temperature Ferrous AlloyIron-Chromiun High temperature alloys*Alloy A286,Website: S66286,SAE AMS 5726,Chinese GH2132*Inconel 600,ASTM B564,UN... |
|
|
Axle-centre Alloy |
Axle-centre AlloyPrecision Alloy 3J40Shock-proof & Wear Resistant axle-centre alloy(YB/T5243-1993)Usage: It is applied to produce the axle-centre o... |
|
|
Invar Alloy |
Invar AlloyInvar alloy,Website: F1684,UNS k93600 (FeNi36),Chinese 4J36Usage: Grade 4J32 and 4J36 are suitable for environmental temperature, make d... |
|
|
Elgiloy Alloy |
Elgiloy AlloyPrecision Alloy 3J21*Elgiloy alloy(Co40CrNiMo),Website: 5833,UNS R30003,Chinese 3J21Usage: It is applied to make antimagnetic, corrosi... |
All supplier products
Same products
