.

Qinsun UV-master

In response to the climate resistance testing requirements for outdoor textiles, this equipment can simulate outdoor climate conditions and accelerate testing. Textiles may undergo yellowing, decline, and structural changes under the stimulation of outdoor ultraviolet radiation.

UV testing is conducted by exposing materials to high temperature control conditions and alternating cycles of ultraviolet light exposure and humidity UV uses fluorescent ultraviolet lamps to simulate sunlight, and simulates dew and rainwater through condensation or water spraying. The aging types of textiles include discoloration, loss of luster, powdering, cracking, foaming, brittleness,decline, oxidation, etc

Standards:

ASTM G151 ASTM D4329 D4329 ASTM-D4587.ASTM-G154

Technical parameters:

1. Blackboard temperature setting range:BPT 40-110 ℃; BST 40-120 ℃, but the actual temperature limit of the temperature protection device inside the machine is93 ℃± 10%.

Blackboard temperature control accuracy:± 2 ℃.Blackboard temperature sensors are consumables that require frequent wiping. The surface paint may peel off after a certain period of time, affecting the control accuracy. Therefore, if there is a significant change in color, it needs to be replaced. The specific time depends on the usage situation, usually around two years.

2. Sample size: 48 standard samples of75 * 150mmcan be placed;

3. Sample thickness: The sample thickness shall not exceed 10mm

4. UV wavelength:UVA-340

5. Simulated condensation: The condensation system time can be adjusted

6. Test time: adjustable from0 to 9999

7. Irradiance: adjustable from0 to 1.6w/m2

8. Test time: It can continuously accumulate test time without resetting due to power outages or other factors

9. Irradiance calibration: The irradiance can be calibrated at any point within the set range without changing the program being executed

10. Calibration process: The calibration process achieves automatic input correction to avoid errors caused by manual input

11. UV state, no water, operable

12. Sample space: Large sample space, can be equipped with 3D sample racks

13. Experimental status data can be transmitted through Ethernet cables

14. Lamp lifespan: UV lamp lifespan can reach over 5000 hours

15. Compliant with standards:ASTM G151 ASTM D4329 D4329 ASTM-D4587.ASTM-G154

Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

TTF tensile testing machine / TTF Tensile Tester
TTF tensile testing machine / TTF Tensile Tester Product Introduction: The TTF tensile testing machine is designed to provide high and stable tensile forces in tensile tests. Mostly for toys Des...
Film Heat Shrinkage Tester ASTM D2732
Film Heat Shrinkage Tester ASTM D2732 The film heat shrinkage rate tester is a device specifically designed to measure the shrinkage performance of film materials under heating conditio...
SI80 Carbon Arc Aging Tester | Professional xenon arc aging test chamber
SI80 Carbon Arc Aging Tester | Professional xenon arc aging test chamber Material aging and fading performance test SI80 carbon arc aging tester, carbon arc aging machine through AC light carbon rod, produce arc light, ...
Geomembrane thickness tester丨Geomembrane thickness machine
Geomembrane thickness tester丨Geomembrane thickness machine Scope of Application: Used to determine the thickness of smooth geomembrane and other plastic films under specified pressure and time. The sample ...
Vacuum Blood Collection Tube Suction Volume Tester
Vacuum Blood Collection Tube Suction Volume Tester The main uses, compliance standards, and technical parameters of the Vacuum Blood Collection Tube Aspiration Volume Tester are as follows: Complia...
All supplier products

Same products

Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 Seller: Standard International Group (HK) Limited The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android Seller: China PHONEFIX Technology Co., Ltd WYLIE WL-155 SIM Card Tester is used to detect SIM card circuits and supports dual-SIM detection ...
HCV1500 High-precision Voltage Sensor
HCV1500 High-precision Voltage Sensor Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd HCV1500 high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and vari...
Xenon Test Chamber
Xenon Test Chamber Seller: Standard International Group (HK) Limited Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
Single Cable Vertical Flame Tester
Single Cable Vertical Flame Tester Seller: Qinsun Instruments Co., LTD Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...