TTF tensile testing machine / TTF Tensile Tester

Product Introduction:

The TTF tensile testing machine is designed to provide high and stable tensile forces in tensile tests. Mostly for toys

Destructive tension test; The cylinder provides power; The clamp of the specimen can be adjusted to any suitable position.

Parameter theoretical maximum push/pull 188/168 Kgf

Maximum travel 150 mm

Speed 50-800 mm/s

Volume 1620×320×421 mm

It weighs about 81kg

Standards：

EN 71-1

ASTM F963

16 CFR 1500

ISO 8124-1

GB 6675-2

TTF test method:

Applicable: All McDonald's products required for TTF testing.

All kinds of children products can be tested on the TTF Tensile Tester.

Purpose:

Collect and analyze data to assess process capability and deviation of the production process to further

To evaluate the safety and reliability of the product.

Test conditions:

Room temperature: 23±2℃， humidity 20% —— 70%.

TTF test machine travel speed: 0.7±0.1in/sec.

TTF test engine air pressure: 60±10psi (4.2±0.7kgf/cm)

TTF test operation procedure:

Check/adjust the test environment to meet the requirements (room temperature: 23±2℃; Humidity 20% —— 70%)。

Check whether all components on the TTF machine are in good condition and connected/secured.

Open the air pressure pump and adjust the air pressure valve of the air pressure pump to make the air pressure of the air pressure pump meet the requirements (60±10psi)。

Adjust the pressure valve of TTF machine to make the pressure reach the requirement (60±10psi)。

Start the TTF machine and check whether the TTF machine is normal (such as whether the taxi is smooth, etc.)。

Install the tension pound and adjust the intake valve on the pneumatic machine of the TTF machine to make its travel speed reach the requirement (0.7±0.1in/sec)。

Position adjustment of TTF machine.

After alignment adjustment, secure the position.

Test fixture specified in the force bitmap /TTF test demonstration diagram.

The sample process must be placed in the required environment (room temperature 23±2℃， humidity 20% —— 70%) for 4 hours before it can be carried out.

Performing a Test.

Record the test result After the Test.

Technical Parameters:

1. Theoretical Maximum Push/Pull Force: 188/168 kgf

2. Maximum Stroke: 150 mm

3. Speed: 50-800 mm/s

4. Dimensions: 1620 × 320 × 421 mm

5. Weight: Approximately 81 kg

Other supplier products

	High and low temperature universal creep testing machine	Product Introduction: High and low temperature universal creep testing machine is mainly used for non-metallic materials creep, stress relaxation,...
	Upper Leather Flexing Tester ISO 4643	Meet the standard GB/T20991-2007. EN ISO. SATRA TM25. ISO 4643 and other standards. Main uses VAMP VAMP leather extension testing machine with a...
	Catheter Power Injection Flow and Pressure Tester YY 0285.1	Main Uses The catheter flow and pressure tester for power injection is an important medical device, mainly used to detect key parameters such as f...
	Taber Abrasion Tester (Double-Head)	Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347 (glass/plastics) ASTM Standards: ASTM D1044 (transparent plas...
	Catheter Residual Vacuum Tester YY/T 0339	Compliance Standards YY/T 0339 - 2019 Suction Catheters for the Respiratory Tract, etc. Main Uses The catheter residual vacuum tester is mainly ...

All supplier products

Same products

	Bottle Wall and Bottom Thickness Tester	Seller: Standard International Group (HK) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Seller: Standard International Group (HK) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Seller: Standard International Group (HK) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Seller: Standard International Group (HK) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Seller: Standard International Group (HK) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...