Ultraviolet Irradiation Crosslinking Equipment
UV-LJ type UV-light irradiation cross-linked cable equipment
Ultraviolet Irradiation Crosslinking Equipment
Ultraviolet Irradiation Crosslinking Equipment Factory
The UV-light irradiation cross-linking process uses UV-light as the irradiation source, extrudes and coats the mixed photo-crosslinking polyolefin compound on the conductor wire core, and then immediately enters the special irradiation equipment for fused photo-crosslinking. The insulated wire core after light irradiation cross-linking can be produced into photo-crosslinking polyolefin insulated wire and cable products through cooling treatment at different temperatures and other subsequent processing.
UV-light irradiation cross-linking method needs to be slightly modified only on the original normal extrusion production line. The upper traction, irradiation box and electric control cabinet with a small floor area can meet the operating requirements and produce UV-light irradiation cross-linked polyethylene wire and cable products. The addition of upper traction enables the conductor wire core to maintain a certain tension. In the running process, it shall be always in the center of irradiation box to ensure the best irradiation effect. The irradiation box uses a reflective focused UV light source that is uniformly configured and specially designed, and the electrical control system will ensure that the UV-light intensity and the irradiation temperature in the center of the irradiation box are in the optimum operating conditions. In addition, the efficient photo-initiation system rapidly induces cross-linking reaction of polyolefin under the UV-light irradiation, so that the irradiation equipment can reach a continuous production speed of dozens of meters per minute, and gradually cools at hot, warm and cold temperatures to ensure the stability of three-dimensional cross-linked netlike structure.
Send product request
Other supplier products
 |
Measurement of specific gravity density of cable material by solid density meter | Measurement of specific gravity density of cable material by solid density meter Wire and Cable Detection Equipment digital display density measu... |
 |
LSUV-LJ type UV-light irradiation cross-linked cable equipment | LSUV-LJ type UV-light irradiation cross-linked cable equipment Ultraviolet Irradiation Crosslinking Equipment Ultraviolet Irradiation Crosslinkin... |
 |
Low Current Resistance Measuring Meter | LowCurrent Resistance Measuring Meter Resistance Test Instrument Resistance Test Instrument Supplier ZY9733 and ZY9734 digital desktypelowcurren... |
 |
LH-401B 250℃ Heat Aging Test Chamber | LH-401B 250℃ Heat Aging Test Chamber cables heat aging test Chamber,plastics heat aging test Chamber It is mainly suitable for the heat aging tes... |
 |
Outside Micrometer | Outside Micrometer With Electronic Digital Display Outside Micrometer Measure sample size Micrometer with electronic digital display with an accur... |
Same products
 |
RTDS121C Ceramic Uncooled Thermal Detector | Seller: IRay Technology Co., Ltd. | RTDS121C Ceramic Packaged Uncooled Infrared Detector employs a self-developed 12μm uncooled VO... |
 |
EHS Shore Durometer Hardness Tester Unit | Seller: Mikrometry instruments limited | EHS1A/5D is a high-precision digital shore hardness meter. This EHS digital shore hardness tester... |
 |
EHP210 Leeb Digital Hardness Tester | Seller: Mikrometry instruments limited | EHP210 is a light and portable tester. With 5 inch touch screen design. It is most suitable for t... |
 |
EFGH Advanced Force Indicator | Seller: Mikrometry instruments limited | The EFG20H professional digital advanced force gaugeindicator is designed to work with a wide ran... |
 |
YOYIK Sootblowing Signal Input Terminal DZXL-ZL-E-725 | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | Pakistan Thermal Power Sootblowing Signal Input Terminal DZXL-ZL-E-725 Dongfang Yoyik Engineering... |
