Ultraviolet Irradiation Crosslinking Equipment
UV-LJ type UV-light irradiation cross-linked cable equipment
Ultraviolet Irradiation Crosslinking Equipment
Ultraviolet Irradiation Crosslinking Equipment Factory
The UV-light irradiation cross-linking process uses UV-light as the irradiation source, extrudes and coats the mixed photo-crosslinking polyolefin compound on the conductor wire core, and then immediately enters the special irradiation equipment for fused photo-crosslinking. The insulated wire core after light irradiation cross-linking can be produced into photo-crosslinking polyolefin insulated wire and cable products through cooling treatment at different temperatures and other subsequent processing.
UV-light irradiation cross-linking method needs to be slightly modified only on the original normal extrusion production line. The upper traction, irradiation box and electric control cabinet with a small floor area can meet the operating requirements and produce UV-light irradiation cross-linked polyethylene wire and cable products. The addition of upper traction enables the conductor wire core to maintain a certain tension. In the running process, it shall be always in the center of irradiation box to ensure the best irradiation effect. The irradiation box uses a reflective focused UV light source that is uniformly configured and specially designed, and the electrical control system will ensure that the UV-light intensity and the irradiation temperature in the center of the irradiation box are in the optimum operating conditions. In addition, the efficient photo-initiation system rapidly induces cross-linking reaction of polyolefin under the UV-light irradiation, so that the irradiation equipment can reach a continuous production speed of dozens of meters per minute, and gradually cools at hot, warm and cold temperatures to ensure the stability of three-dimensional cross-linked netlike structure.
在线联系供应商
Other supplier products
 |
digital display density measuring instrument | Measurement of specific gravity density of cable material by solid density meter Wire and Cable Detection Equipment digital display density measu... |
 |
Cable Detection Equipment Supplier | CP-50 Wire and cable sheet-punching machine Wire and Cable Detection Equipment Cable Detection Equipment Supplier CP-50 type die punching machine i... |
 |
digital desk type low current resistance measuring meters | LowCurrent Resistance Measuring Meter Resistance Test Instrument Resistance Test Instrument Supplier ZY9733 and ZY9734 digital desktypelowcurrent r... |
 |
LH-401B 250℃ Heat Aging Test Chamber | LH-401B 250℃ Heat Aging Test Chamber cables heat aging test Chamber,plastics heat aging test Chamber It is mainly suitable for the heat aging tes... |
 |
Double Faced Flaker | Double Faced Flaker Wire and Cable Detection Equipment Cable Detection Equipment Factory Features and usages: The machine is widely used in rub... |
Same products
 |
RIGOL DS1104Z Plus 4 Channels 100MHz Digital Storage Oscilloscope | 卖方: 深圳市维客修科技有限公司 | Description RIGOL DS1104Z Plus4 Channels 100 MHz Digital Storage Oscilloscope with 1 GSa/s... |
 |
RTDS121C Ceramic Uncooled Thermal Detector | 卖方: IRay Technology Co., Ltd. | RTDS121C Ceramic Packaged Uncooled Infrared Detector employs a self-developed 12μm uncooled VO... |
 |
EHS Shore Durometer Hardness Tester Unit | 卖方: Mikrometry instruments limited | EHS1A/5D is a high-precision digital shore hardness meter. This EHS digital shore hardness tester... |
 |
EHP210 Leeb Digital Hardness Tester | 卖方: Mikrometry instruments limited | EHP210 is a light and portable tester. With 5 inch touch screen design. It is most suitable for t... |
 |
EFGH Advanced Force Indicator | 卖方: Mikrometry instruments limited | The EFG20H professional digital advanced force gaugeindicator is designed to work with a wide ran... |
