EHS Shore Durometer Hardness Tester Unit

EHS1A/5D is a high-precision digital shore hardness meter. This EHS digital shore hardness tester adopts high-precision displacement sensor and spring design with high test accuracy.

Shore durometer tester or durometer meterhas three measurement modes: maximum mode, maximum average mode, and timing mode; 500 measurement data can be stored as one type of hardness test instrument, and the measurement data can be connected to PC software to export, built-in wireless printing function, you can connect wireless printer to print measurement data.

The rubber roller hardness tester/durometer gauge price from our measuring instruments manufacturing company is very reasonable, welcome to order our durometer rubber roller shore hardness tester unit. The shore A durometer gaugeused to measure soft plastic, rubber, synthetic rubber, felt, and leather. The shore A hardness test method is either hand-held for measurement or used in conjunction with the supporting load frame, and durometer hardness unit is the "degree". Different from the leeb portable hardness tester which is mainly used to test the hardness of metal materials, the shore A durometer gauge is focused on rubber and soft plastic hardness test.

Shore Hardness Gauge-1600 Features

Shore A Durometer Gauge include Calibration certificate

Shore A Meter conforms to ASTM D 2240, GB/T 531.1, ISO7619-1

Shore Hardness Gauge has a large, easy to read LCD display with a backlight

Shore Durometer tester measurement mode are concluding Averaging mode, Max mode, Max-Average mode

Shore Hardness Meter measurement data can be stored, browsing, and batch printing

Printing: Wireless mini printer

Shore Hardness Meter-1600 Specifications

Shore A durometer tester is usually classified into following types. Digital durometer shore A is used for measurements below 90 degrees, and shore D hardness durometer tester is used for measurements above HA 90 degrees. Shore O hardness shore o durometertester for rubber is used when the measuring degree is less than 20 degrees and the thickness of the measuring object is less than 3mm (the two are actually used less).

How To Use Durometer Gauge?

1． Specimen

（1）The surfaces of the specimen shall be flat and parallel over an area to permit the presser foot to contact the specimen over an area having a radius of at least 6.0 mm from the indenter point.

（2）The specimen shall be suitably supported to provide for positioning and stability.

（3）The specimen shall be at least 6.0 mm in thickness unless it is known that results equivalent to the 6.0mm values are obtained with a thinner specimen.

（4）The lateral dimensions of the specimen shall be sufficient to permit measurements at least 12.0 mm from any edge.

2． Test Mode

There are three kinds of modes:

Average mode(AVE), maximum mode (MAX) , and Timing mode.

AVE: To calculate the hardness value with the average indentation depth.

MAX: To calculate the hardness value with the maximum indentation depth.

Timing: To calculate the hardness value with the maximum indentation depth.

3． Test Procedure

4． Reading Test Data

The measured value, mean and maximum value can be read on LCD.

And can browse the historical data in memory. The data in memory are the average of every statistic group.

Enter Menu-Memory, select Browse All, or Browse Select.

5．Data Printing

The test report can be print using EPX-58P wireless printer. You can set the Auto Print to ON, or print the historical data in memory by Print All and Print Select. The print items can be chosen in Print Items.

Turn on the printer, and put it near the durometer (not more than 2m away). If Auto Print is set to ON When a group of tests is finished the report will print automatically.

How To Calibrate Shore Hardness Tester？

For a long-term use or other reasons, some measurement errors may occur. The error can be eliminated by the calibration of shore hardness tester unit.

Enter Menu-System-Calibration

Test on a standard hardness block or a standard thickness block.

As a professional measuring instruments suppliers, Mikrometryprovide force gauge meter, cap torque meter, shore instruments durometer, shore meter hardness, durometer gauge for rubber, digital torque gaugeetc. We also offer optimized solutions for special requirements.

Other supplier products

	Digital Force Gauge	Digital Force Gauge The digital high accuracy force gaugeis not only for various physical and mechanical performance tests of rubber, plastic shee...
	EST-FG2 Manual Force Measurement Test Stand	The test stand EST-FG2V/H is a electric motor test stand. It has a built-in DC motor, displacement measurement device, good load stability, wide ap...
	Digital Force Gauge	What Is Force Meter Used For? The digital force gauge meteris not only for various physical and mechanical performance tests of rubber, plastic ...
	DHG-050 Digital Height Gauge	DHG-050 Digital HeightGauge The DHG-050 digital high gaugeis a compact digital micrometer offering flawless contact measurements of dimensions, th...
	DIGITAL FORCE GAUGE	Digital Small Force Gauge The digital force gauge meter is not only for various physical and mechanical performance tests of rubber, plastic sheets...

All supplier products

Same products

	EHS Shore Durometer Hardness Tester Unit	Seller: Mikrometry instruments limited	EHS1A/5D is a high-precision digital shore hardness meter. This EHS digital shore hardness tester...
	EHP210 Leeb Digital Hardness Tester	Seller: Mikrometry instruments limited	EHP210 is a light and portable tester. With 5 inch touch screen design. It is most suitable for t...
	EFGH Advanced Force Indicator	Seller: Mikrometry instruments limited	The EFG20H professional digital advanced force gaugeindicator is designed to work with a wide ran...
	Torque Tester	Seller: Mikrometry instruments limited	Mikrometry Instrument Limited is a measuring instruments manufacturing companyand manufacturer of...
	Test Stand	Seller: Mikrometry instruments limited	Mikrometry Instrument Limited is a measuring instruments manufacturing companyand manufacturer of...