Latch Type Hall Sensor AH4158
Latch Type Hall Sensor AH4158
Hall Sensor
Hall Switch
Features
Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V;
Operating temperature range: -55℃ ~ 150℃;
Rated output current (sink) : 300 mA, it can directy drive the coils of DC motor (Fan );
Special design make the sensor owns imunity to logic race condition, short switch time and good switch sensitivity;
No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;
Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements.
AH4158 Hall Sensor is a kind of unipolar field excitation two ends complementary output switch type Hall IC. Complementary output Hall sensor is particularly suitable for double coil DC motor, double coil DC fan, speed measurement and rotation control. The sensor chip intergrated bandgap reference voltage source, Hall voltage generator, signal amplifier, hysteresis controller, reverse voltage protection diode, and two way complementary output open collector output driver which sink current reaches 300mA and so on circuit unit. Excellent bandgap reference voltage source ensures the sensor can keep concordant sensitivity in a wide temperature range. Reverse voltage protection diode can avoid reverse power failure.
Send product request
Other supplier products
 |
Micropower Omnipolar Hall Sensor AH3661 | Micropower Omnipolar Hall SensorAH3661 Hall Sensor Hall Switch Features Micropower designing; Rated supply voltage 2.4 V ~ 5.5 V; Omnipolar operati... |
 |
AH3144 Unipolar Type Hall Sensor | AH3144 Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating temperature range: -40℃ ~ 150℃; Rated output cu... |
 |
Unipolar Type Hall Sensor AH3141 | Unipolar Type Hall SensorAH3141 Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating ... |
 |
Linear Hall Sensor AH496B | Linear Hall Sensor AH496B Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 10 V;, Operating temperature range: -40℃ ~ 125℃; Rail to... |
 |
Linear Hall Sensor AH3511 | Linear Hall Sensor AH3511 Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 6 V,; Operating temperature range: -40℃ ~ 125℃; Rail to Ra... |
Same products
 |
"China manufacturer power supply VM-5H3 for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer power supply VM-5H3 for power generation Is to use the generator sets of prof... |
 |
china manufacturer flowmeter D2-FA65-65C/RL for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer flowmeter D2-FA65-65C/RL for power generation Is to use the generator sets of... |
 |
proximity switch Ni10-K20-Y1 power plant spare parts | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China supplier proximity switch Ni10-K20-Y1 power plant spare parts Dongfang Yoyik is specializi... |
 |
China supplier Pull Switch HKLS-ll power plant spare parts | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China supplier Pull Switch HKLS-ll power plant spare parts YOYIK produced by the development of ... |
 |
ABB Bailey Analog Input Module IMASI13 | Seller: 840499 | Monitoring process variables such as temperature, pressure, flow, and level Interfacing with se... |
