GDY-1A Oxygen Bomb Calorimeter
Summary
The instrument is designed and made as per national standards of People’s Republic of ChinaGB/T213-2008 Test Method for Calorific Value of coal,GB/T384-1988 Test Method for Calorific Value of Petroleum Productsand Calibration Regulation of People’s Republic of ChinaJJG672-2001 Oxygen Bomb Calorimeter, as well asShanghai enterprise standardQ/YXYY 10 XRY Series Oxygen Bomb Calorimeter.
The heat capacity of the instrument is 14400 J/K～14500 J/K, and it is suitable to determine calorific value of combustible materials such as petroleum products without water (gasoline, jet fuels, diesel oil and fuel oils, etc.), coal, coke and paraffin, etc.
I. Main technical features
1. This instrument adopts sealed oxygen bomb. The whole structure adopts stainless steel material. The strength is enough to resist the max pressure (60~70 atmospheric pressure) when the solid burning. And it can resist the bigger pressure when liquid fuel burning.
2. The inner water cylinder is composed of stainless steel sheet.The cross section is pyriform and the capacity is 3kg. The water cylinder is equipped with electric stirrer inside. It ensures the temperature in the water cylinder uniform.
3. The external water jacket is double layer container. It filled with water when doing determination.It make the water temperature in the cylinder uniform by water jacket stirrer and form the constant temperature environment meeting the requirements of test.
II. Main technical specifications
1. Heat capacity: 14400 J/K～14500 J/K
2. Resolution: 0.001 K
3. Measurement accuracy: ± 60J/g
4. Repeatability : ≤0.2% (Grade C)
5. Pressure endurance of oxygen bomb: 20 MPa
6. Temperature measurement range: 10 ℃～35 ℃
7. Ambient temperature: 20±5 ℃, the fluctuation is not more than 1℃ during a test
8. Data saved: 31 pieces
9. Relative humidity: ≤85%
10. Power supply: AC 220V±5%, 50 Hz
11. Dimension: 600mm×460mm×430mm
(Note: Pellet press machine is optional accessory)
Send product request
Other supplier products
 |
GDGS Automatic Transformer Capacitance Tester, Dissipation Factor Tester | 1PowerFactor Testerapplication GDGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation mate... |
 |
GDGS Good Quality Tan Delta Test Set for Power Transformers | 1PowerFactor Testerapplication GDGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation mate... |
 |
Automatic Viscosimetry Viscometer Tube Cleaner and Dryer | Introduction: »GD-265-3 Automatic Capillary Viscometer Washeris designed and made specially for washing the capillary viscometers, which are ... |
 |
GDGS Insulation Material Volume Resistivity Tester | I.Application GDGS automatic tan delta tester is applied to measure the dielectric loss and capacitor value of insulation materials in high volt... |
 |
GD-0610 Asphalt Rolling Thin Film Oven | Summary This instrument is designed and made as per industrial standardT 0610-2011 Standard Test Method for Effect of Heat and Air on a Moving Film... |
Same products
 |
manual pressure testing pump | Seller: Hangzhou Evershining Machinery Co.,Ltd | Item:RP-50 Pressure: 0--50bar Flow volume:45ml/min Water tank volume:12L Meas: 51*18*29cm |
 |
Digital Rail Head Wear Gauge | Seller: Wuhan Linkage Track Equipment Co., Ltd | Rail wear gauge（rail head loss gauge also call it rail profile gauge）is mainly used to measure th... |
 |
Indicators | Seller: ZHEJIANG HAOYU INDUSTRY & TRADE CO.,LTD | Electronic Scales cannot be properly operated without suitable weighing indicator. Their design a... |
 |
HY001 Weighing Indicator | Seller: ZHEJIANG HAOYU INDUSTRY & TRADE CO.,LTD | Application of HY 001multiple Funcation Weighing Indicator with Printer HY001 must suitable for ... |
 |
Diaphragm Pressure Gauge | Seller: Lanso Instruments LLC. | Diaphragm pressure gauges are mainly used to measure the pressure of special media such as high-v... |
