GDJ-1F Brookfield Viscometer
Summary
The instrument is designed and made as per national standards of People’s Republic of ChinaGB/T213-2008 Test Method for Calorific Value of coal,GB/T384-1988 Test Method for Calorific Value of Petroleum Productsand Calibration Regulation of People’s Republic of ChinaJJG672-2001 Oxygen Bomb Calorimeter, as well asShanghai enterprise standardQ/YXYY 10 XRY Series Oxygen Bomb Calorimeter.
The heat capacity of the instrument is 14400 J/K～14500 J/K, and it is suitable to determine calorific value of combustible materials such as petroleum products without water (gasoline, jet fuels, diesel oil and fuel oils, etc.), coal, coke and paraffin, etc.
I. Main technical features
1. This instrument adopts sealed oxygen bomb. The whole structure adopts stainless steel material. The strength is enough to resist the max pressure (60~70 atmospheric pressure) when the solid burning. And it can resist the bigger pressure when liquid fuel burning.
2. The inner water cylinder is composed of stainless steel sheet.The cross section is pyriform and the capacity is 3kg. The water cylinder is equipped with electric stirrer inside. It ensures the temperature in the water cylinder uniform.
3. The external water jacket is double layer container. It filled with water when doing determination.It make the water temperature in the cylinder uniform by water jacket stirrer and form the constant temperature environment meeting the requirements of test.
II. Main technical specifications
1. Heat capacity: 14400 J/K～14500 J/K
2. Resolution: 0.001 K
3. Measurement accuracy: ± 60J/g
4. Repeatability : ≤0.2% (Grade C)
5. Pressure endurance of oxygen bomb: 20 MPa
6. Temperature measurement range: 10 ℃～35 ℃
7. Ambient temperature: 20±5 ℃, the fluctuation is not more than 1℃ during a test
8. Data saved: 31 pieces
9. Relative humidity: ≤85%
10. Power supply: AC 220V±5%, 50 Hz
11. Dimension: 600mm×460mm×430mm
(Note: Pellet press machine is optional accessory)
在线联系供应商
Other supplier products
 |
Automotive Oil Kinematic Viscometer for Kinematic Viscosity from -40 to +100C | Introduction: » GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis designed and made as per the industry standard of People’... |
 |
GDGS Full-Automatic Tangent Delta Test Set for Transformer Substation | 1PowerFactor Testerapplication GDGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation mate... |
 |
GD-265D-1 Kinematic Viscometer | I. Main technical features 1. The instrument is a kind of specially-made testing machine which the temperature control accuracy can reach ±0... |
 |
GDVA-402 IEC60044 Current Transformers Tester CT Analyzer | GDVA-402 IEC60044 Current Transformers Tester CT AnalyzerIntroduction:»GDVA-402 IEC60044 Current Transformers Tester CT Analyzeris a special ... |
 |
GD-3536-1 Cleveland Open-Cup Flash Point Tester | I. Main technical features 1. It adopts technology of single chip microcomputer and LCD screen. English man-machine interface.The heating device is... |
Same products
 |
Tungsten Carbide Ring Gauge | 卖方: Rich Treasure Precision Industrial Co., Ltd | Tungsten Carbide Ring Gauge, also known as correction Tungsten Carbide ring gauge, is a ring made... |
 |
Customized Steel Pin Gauge | 卖方: Rich Treasure Precision Industrial Co., Ltd | In order to meet the various needs of customers, we specially launch the customized service of no... |
 |
Double Sided GO/NO GO Plug Gauge | 卖方: Rich Treasure Precision Industrial Co., Ltd | Double Sided Go/No Go Plug gaugeis widely used in the manufacturing industry, such as the electro... |
 |
Ceramic Pin Gauge Set | 卖方: Rich Treasure Precision Industrial Co., Ltd | Set/Single Item Classfication: Set metric gauge Material: CeramicModel: RT0A-RT4BHardness: Upper... |
 |
Tungsten Carbide Pin Gauge Set | 卖方: Rich Treasure Precision Industrial Co., Ltd | Features of Tungsten Carbide Pin Gauge Set● wear-resistant● High temperature resistance● Corrosio... |
