.

Digital combo set SVG-5

A digital combo set.
Available in four modifications.

A digital combo set for maintenance and repair of carrier channels and data transmission equipment of information structures.

Functions

  • Sine-wave generator
  • Broadband rms voltmeter
  • Narrowband (selective) rms voltmeter
  • Frequency meter
  • Waveform monitor
  • Spectrum analyzer

Measured parameters

  • measurement of root-mean-square AC voltage and frequency of single-ended or differential signals
  • generation of sine-waves
  • visual examination of freeform signals
  • signal spectrum analysis

Standard scope of supply

  • Digital combo set SVG-5
  • AC220/12 V power adapter
  • Set of cables
  • Instrument certificate, testing guidance, operation manual
  • Carrying case

Technical characteristics

1. Sine-wave generator
Frequency range 30 Hz … 2.5 MHz
Step 1 Hz
Frequency setting error ±1 · 10-5 % ±1Hz
Output signal level at characteristic impedance termination -50 dB… +14 dB
(2.5 mV … 3.88 V)
Output signal level setting step 0.1 dB (0.01 V)
Single-ended output impedance 50 Ohm (75 Ohm)
Differential output impedance 100 Ohm (150 Ohm)
Level setting relative error ±5 %
2. Broadband rms voltmeter
Measured signal level range -50 dB … +40 dB
(2.5 mV … 77.5 V)
Input signal frequency range 30 Hz … 2.5 MHz
Level measurement relative error ±5 %
Single-ended input impedance 50 Ohm, 75 Ohm, 100 Ohm, 600 Ohm, 1 MOhm
Differential input impedance 100 Ohm, 150 Ohm, 200 Ohm, 1200 Ohm, 1 MOhm

3. Narrowband (selective) rms voltmeter
Measured signal level range -50 dB… +40 dB (2.5 mV … 77.5 V)
Input signal frequency range 30 Hz … 2.5 MHz
Level measurement relative error ±5 %
Frequency bandwidth at -3 dB 40 Hz, 100 Hz, 1.7 kHz
Single-ended input impedance 50 Ohm, 75 Ohm, 100 Ohm, 600 Ohm, 1 MOhm
Differential input impedance 100 Ohm, 150 Ohm, 200 Ohm, 1200 Ohm, 1 MOhm
4. Frequency meter
Measured frequency range 30 Hz … 2.5 MHz
Measured signal level range 77.5 mV…77.5 V
Level measurement relative error ±1 · 10-5 % ±1 Hz

5. Wave form monitor
Amplitude scanning range 10 µV…100 V
Time scanning range 5 ns… 5 s
Input signal frequency range 30 Hz … 2.5 MHz
Number of channels 1

6. Spectrum analyzer
Maximum frequency 4 MHz
Scale division interval 5 kHz, 50 kHz, 400 kHz
Instantaneous dynamic range 60 dB
Full dynamic range 80 dB

  • Real-time clock
  • 10 settings in memory for each mode
  • Saves 50 previous measurements in voltmeter mode
  • Continuous work time 8 hours


Send product request

To: Kontour ETC
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Multifunctional radio-measuring instrument RST-430
Multifunctional radio-measuring instrument RST-430 A universal radio test set for complete maintenance and repair of FM and AM radio stations of the VHF band RST-430 is a multipurpose radio measuri...
Digital combo set SVG-5
Digital combo set SVG-5 A digital combo set.Available in four modifications. A digital combo set for maintenance and repair of carrier channels and data transmission equi...
All supplier products

Same products

Indicators
Indicators Seller: ZHEJIANG HAOYU INDUSTRY & TRADE CO.,LTD Electronic Scales cannot be properly operated without suitable weighing indicator. Their design a...
HY001 Weighing Indicator
HY001 Weighing Indicator Seller: ZHEJIANG HAOYU INDUSTRY & TRADE CO.,LTD Application of HY 001multiple Funcation Weighing Indicator with Printer HY001 must suitable for ...
Diaphragm Pressure Gauge
Diaphragm Pressure Gauge Seller: Lanso Instruments LLC. Diaphragm pressure gauges are mainly used to measure the pressure of special media such as high-v...
SF6 Gas Density Switch
SF6 Gas Density Switch Seller: Lanso Instruments LLC. Density switch is a kind of gas density monitor used to monitor the density of SF6 gas in a seale...
SF6 Gas Density Relay
SF6 Gas Density Relay Seller: Lanso Instruments LLC. SF6 Gas Density Relay The SF6 gas density meter with pointer and scale installed on the SF6 circu...