Telecentric Lens Design Principle and Technical Advantages
Telecentric Lens is an optical design that the principal ray is in parallel to the optical axis. Because of these characteristics, the main advantages of the telecentriclens is to eliminate distortion when off-focus and provide superior image performance when doing high precision measurement and inspection.
Telecentric Lens Definition
Telecentric imaging lenshas three catagories, object space telecentric, image space telecentric and bi telecentric lens. The difference between these three kinds lies in that the chief ray which is parallel to the optical axis is on the object space, or in the image side, or in both the object and image spaces. Object space telecentric lensand bi telecentric lens are the most popular telecentric lens in applications.
Telecentric Lens Design
The purpose of telecentric lens design is to eliminate the difference in magnification caused by the inconsistency of the distance between the measured object and the lens. And different telecentric lenses will need different telecentric design.
The design principle of the object space telecentric light path
The convergent center of the object space chief ray parallel to the optical axis is located infinitely far away from the image space, which is called the object space telecentric light path. Its function is: it can eliminate the reading error caused by inaccurate focusing of the object.
The convergent center of the chief ray of the image side parallel to the optical axis is located infinitely far away from the object, which is called the image-side telecentric light path. Its function is to eliminate the measurement error caused by the inaccurate focusing on the image side.
It integrates the dual functions of object space/image space telecentricity, and is mainly used in the field of vision measurement and detection. Bi-telecentric lens, which is also called a double telecentric lens, adopts this principle.
Technical Advantages of Telecentric Lens
High resolution
The image resolution is generally measured by the CTF (contrast transfer function) that quantifies the existing spatial frequency contrast of the image sensor, and the unit is lp/mm. Most machine vision integrators often just gather a large number of cheap low-pixel, low-resolution lenses, and finally can only generate blurred images. With a telecentric lens, even with a small pixel image sensor, high-resolution images can be generated.
True telecentric lens design: ultra-wide depth of field and low distortion
There was a view that the telecentric lens mainly solves the distortion problem. In fact, the telecentric lens solves not only the distortion problem, but the low distortion is only an additional attribute of the telecentric lens. The unique optical characteristics of the telecentric lens: when the object moves in the field of view, its magnification in different positions will not change, which determines that it cannot be replaced by ordinary industrial lenses in some fields. For example, its larger depth of field can be well adapted to the working environment on site, which is not a problem that can be solved only by algorithms.
Unique parallel light path design
Designing a telecentric industrial lens for parallel-light imaging is not complicated in theory, but it is another matter to achieve a certain resolution and imaging quality. The telecentric lens design and manufacture is indeed more difficult than a lens in the general sense. The reason is that the size of the optical lens of the telecentric lens is relatively large, which makes the correction of various phase differences of the edge light more difficult.
In order to obtain a good image quality of the edge field of view, higher product design and manufacturing accuracy is required, and in many cases it is necessary for the designer to have relatively rich design experience.
Choose the Right Telecentric Lens Design
How to choose the right telecentric lens design? First of all, the lens compatible CCD size should be equal or larger than the camera sensor size; Secondly, calculate the mag when the object size and camera sensor size are confirmed, always choose a smaller mag if no existing suitable mag so as to cover all the object area. Finally, check the WD & lens size to make sure it can fit in the whole system's design. Pay attention to other requirements like distortion, or DOF if necessary.
As a professional bi telecentric lens factory, we provide telecentric lens system, telecentric optical system, telecentric imaging system, telecentric objective, telecentric system, etc. For more information, please feel free to contact us!
Send product request
Other supplier products
 |
DMD Lithography Lens | DMD Lithography Lens We have been in close cooperation with LDI (Laser Direct Imaging) manufacturers, to research and produce LDI lens. Our... |
 |
Microscope Objective Lens | Microscope Objective Lens Suitable for ITO, particle detection, wafer inspection Infinity optical design for different microscope lensescan mat... |
 |
High Mag 1/2' Sensor Telecentric Long Working Distance Lens | Standard resolution telecentric lens Wide magnification range from 0.5X to 2X Bi-telecentric design and object telecentric design 22 sta... |
 |
High Mag 1/2' Sensor Telecentric Long Working Distance Lens | Standard resolution telecentriclens Wide magnification range from 0.5X to 2X Bi-telecentric design and object telecentric design 22 standa... |
 |
16k Line Scan (82mm) Telecentric Lens | Specially designed for large image circle up to 82mm in length Suitable for line scan cameras such as 16K x 5μm,16K x 3.5μm,12K x 5μm, ... |
Same products
 |
8.0MP 10-40mm Zoom Lens 1/1.8" F1.4 Format Machine Vision Lenses | Seller: Shenzhen Wikshu Technology Co. | Description Manual Zoom 8.0mp C Mount 10-40mm Lens Manual Aperture Machine Vision Lens 1/1... |
|
|
Microscope Objective Lens | Seller: Shenzhen Canrill Technologies Co., Ltd | Microscope Objective Lens Suitable for ITO, particle detection, wafer inspection Infinity opt... |
 |
DMD Lithography Lens | Seller: Shenzhen Canrill Technologies Co., Ltd | DMD Lithography Lens We have been in close cooperation with LDI (Laser Direct Imaging) manufactu... |
 |
8k Line Scan (57.4mm) Telecentric Lens | Seller: Shenzhen Canrill Technologies Co., Ltd | 8k Line Scan Lens Suitable for large format Area Scan Camera Line Scan Camera 16Kx3.5μm, 8Kx7... |
 |
16k Line Scan (82mm) Telecentric Lens | Seller: Shenzhen Canrill Technologies Co., Ltd | 16k Line Scan (82mm) Telecentric Lens Specially designed for large image circle up to 82mm in le... |
