Horizontal Vertical Flame Chamber l Vertical Flame Chamber
Standard
ANSI/UL 94: Standard for Safety of Flammability of Plastic Materials for Parts in Devices and Appliances
GJB 360B-2009: Test Methods for Electronic and Electrical Components (Military Standard)
GB/T 5169.16-2008: Fire Hazard Testing – Part 16: Correlation of Thermal and Mechanical Surface Flammability
IEC 60950-1: Safety of Information Technology Equipment
ISO 13943: Fire Safety – Vocabulary (Referenced for Flammability Testing)
Product Advantages
Dual-Mode Testing: Supports horizontal/vertical combustion analysis (0°, 20°, 45° angles).
Full Automation: PLC + touchscreen control for ignition, timing, data logging, and burner retraction.
Precision Control: Adjustable flame height (20–130 mm), temperature (100–1000°C), and gas flow (0–1000 ml/min).
Safety Compliance: Auto-gas shutoff, silent exhaust system, and optional gas alarm reduce operational risks.
Data-Driven: Auto-calculates linear combustion rate (V) and stores results for regulatory compliance.
Flexible Sample Handling: Adjustable clamps accommodate diverse material sizes and thicknesses.
Product Features
Touchscreen Interface: Programmable controller with one-touch operation for ignition, timing, and data storage.
Automatic Burner System: Retracts post-test; optional gas shutoff prevents residual flames.
Flame Calibration: Optional thermocouple (K-type) and copper block ensure precise temperature control (100–700°C in ≤44s).
Multi-Angle Testing: Adjustable sample holder for horizontal (0°), 20°, or 45° vertical combustion.
High-Capacity Chamber: >0.5 m³ stainless steel box (non-calibrated options: 0.75 m³/1 m³) with black background (
Exhaust System: Silent anti-backflow device removes combustion smoke post-test.
Technical Parameters
| Parameter | Specification |
|---|---|
| Test Modes | Horizontal/Vertical (0°, 20°, 45°) |
| Control System | PLC + 7-inch Touchscreen |
| Flame Height | 20–130 mm (Adjustable) |
| Flame Temperature | 100–1000°C (Adjustable) |
| Gas Flow | 0–1000 ml/min (Adjustable) |
| Burner Specs | Inner Diameter: 9.5 ±0.3 mm; Length: 100 ±10 mm |
| Timer Range/Accuracy | 0–999.9 s (±0.2 s for 10s/30s) |
| Combustion Rate (V) | Auto-Calculated by PLC (Displayed/Saved) |
| Sample Adjustment | Up/Down, Left/Right, Front/Back (Large Stroke) |
| Chamber Volume | >0.5 m³ (900 × 590 × 1050 mm) |
| Power Supply | AC 220V ±10%, 50Hz, 150W |
| Dimensions (W×D×H) | 1160 × 600 × 1310 mm (Incl. Feet) |
| Net Weight | 100 kg |
| Gas Source | Liquefied Petroleum Gas (Methane for Arbitration) |
Send product request
Other supplier products
 |
Porton Thermal Manikin Equipment ISO 12949 | Product Introduction: Porton-man was commissioned by the Defense Science and Technology Laboratory (DSTL) to accurately represent military users. ... |
 |
Elastic Tape Fatigue Testing Machine / Elastic Fatigue Testing Machine | Product Introduction: This instrument is used to test the elasticity of elastic belt after reciprocating movement. Standards: SATRA TM103 Appli... |
 |
Automotive Wires Ozone Aging Chamber | Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive a... |
 |
Whole shoe breathability and heat preservation testing machine | Standard SATRA TM376: Thermal insulation testing of footwear with sock integration. SATRA TM386: Water vapor permeability assessment for athletic... |
 |
Geosynthetics Bursting Strength Tester ASTM D | Meet the standard: ASTM D3786-2008.SL/T .etc Scope of application: It is used to determine the bursting strength of geotextiles, geomembranes an... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
