Bally Waterproofness Tester - Leather and Footwear
Product Information:
Bally Waterproofness Tester is to test materials like coated leather, leather dynamic water penetration resistance ability. The material would be partially put in water and the bally water penetration tester would flex the sample in the water under certain speed to simulate material water resistance in daily work.
Principle：
A rectangular test specimen is bent partly round, and secured between, two cylindrical clamps so as to form a trough. The trough is then immersed in water and the clamps oscillate at a constant speed so that the specimen is repeatedly flexed. The time taken for water penetration through the test specimen to occur is recorded. The mass of water absorbed by, and transmitted through, the test specimen can also be measured.
Parameter:
Test quantity：4 sets
Test stroke：2mm, 3mm, 4mm, 6mm (adjustable)
Speed：50 CPM
Counter：LCD, 0 ~ 999.999
Timer：LCD, 1~999hr
Dimension (WxDxH)：48 x 60 x 45 cm (18.9” x 23.6” x 17.7”)
Weight：53 kg
Power：1 Phase, 110V/60 HZ or 220V/50 HZ, 2A or others.
Standards：
DIN-53338.
ISO 5403-1 2011.
GB/T 22890-2008.
EN ISO 20344:2002(6.13),
QB/T 4044.
BS EN 13518-2002.
EN 344-1:1992(5.14),
DIN 53338.
ISO 17702-2003.
SATRA TM 171:1995.
GB/T 3903.17-2008
Send product request
Other supplier products
 |
Catheter Burst Pressure Tester / Catheter Burst Pressure Testing Equipment | Compliance Standards YY/T 1536 - 2017 YY 0285.1 - 2017. etc. Main Uses The catheter burst pressure tester is a key device used to evaluate cathe... |
 |
Light Fastness Testers | Standard Compliance AATCC TM16-2004 Colorfastness to Light AATCC TM16.3 Colorfastness to Light ASTM D2565 Standard Practice for Xenon Arc Expo... |
 |
Artificial turf wear tester EN 15330 | Standard FIFA Quality Programme: Exceeds 2015/2016 handbook requirements for artificial turf abrasion resistance testing. EN 15330-1: European st... |
 |
Pumpability tester EN 12723 ISO 5198 | Product Introduction The pumpability tester is dedicated to accurately testing the pumpability of the shield tail seal grease used in shield const... |
 |
Fabric horizontal burning tester/ Flammability Tester | Standard QB/T 2729: Leather – Horizontal flammability test for physical and mechanical properties. ASTM D5132: Horizontal burning rate of p... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
