Shoe Peeling Strength Tester QB/T
Main uses:
The shoe stripping tester is mainly used to measure the bonding strength between the upper and the sole or other shoe components. By simulating the peeling forces that may be encountered in actual wearing, the adhesive parts of the shoes are precisely tested to ensure the quality and durability of the shoes. The equipment is widely used in all aspects of footwear production, including raw material screening, production process monitoring and finished product quality testing. The use of the tester can find and solve the problems in the production process in time, improve product quality and consumer satisfaction.
Meet the standard:
GB/T 3903.3 -- 2011
QB/T 4329-2012
Product Advantages:
Measures Key Structural Strength: Quantifies the adhesive bond strength between shoe components, a vital factor for footwear durability and integrity.
Standard Compliant: Designed to meet relevant national standards (GB/T 3903.3. QB/T 4329) for testing footwear bond strength.
Simulates Peeling Forces: Replicates the forces that can cause adhesive failure during the shoe's use.
Provides Precise Test: Conducts controlled peeling tests on the adhesive areas.
Applicable Across Production Stages: Useful for testing raw materials, monitoring production processes, and evaluating finished product quality.
Quantitative Result: Measures the peeling force, allowing for calculation of bond strength.
Helps Identify Issues: Data helps pinpoint problems in materials or manufacturing processes affecting bond quality.
Product Features:
Mechanism for securely mounting the shoe or specific shoe components for testing.
Peeling knife or clamping mechanism designed to initiate separation and apply the peeling force to the bonded area.
Force sensor or load cell to accurately measure the instantaneous or average peeling force required to separate the components.
Capability to apply a maximum stripping force (typically 1000N or other specific values, depending on the model) sufficient for various shoe types.
Controllable peeling speed (typically 20$pm$2mm/min, with adjustable rising and falling speed) to ensure a consistent test rate.
Support for using peeling edges or knives of different standard widths (typically 20$pm$0.2mm or 10$pm$0.1mm, with other specifications available).
Robust construction to withstand the forces involved in stripping tests.
Technical parameters:
Maximum stripping force: Indicates the maximum force that the tester can apply, usually 1000N or other specific values, to ensure that the tester can meet the test needs of different shoes.
Peel edge width: the width of the peel edge has an impact on the test results, usually 20±0.2mm or 10±0.1mm (there are also 30±0.1mm and 20±0.05mm and other specifications)， the specific width can be set according to the test requirements and standards.
Peeling knife edge down speed: indicates the moving speed of the peeling knife edge in the test process, usually 20±2mm/min, and the rising and falling speed is adjustable to ensure the stability and accuracy of the test process.
Send product request
Other supplier products
 |
SDC Fading Grey Scale | Applicable Standards The SDC Grey Scale adheres to international colorfastness testing protocols, including: ISO 105-A02(Grey Scale for Asses... |
 |
European standard shrinkage testing machine | European Standard Washer | Product Overview TheEuropean Standard Washer(EN 14399-compliant) is a high-performance fastening component designed for industrial and automotive ... |
 |
Shoe Flexing Tester / Shoe Flexing Test Machines - Reliable & Durable Solutions | Product Introduction Finished shoes bending testing machine Finished shoes bending testing machine Test shoes, casual shoes, work shoes and other ... |
 |
Aatcc 112 Textile Formaldehyde Content Tester | In China, the national mandatory standard "national textile products basic safety technical specifications" GB18401-2003. with effect from 1 Januar... |
 |
Geomembrane Hydrostatic and Permeability Tester丨Geotextile Test Machine | Scope of application: It is used to test the hydrostatic pressure resistance and permeability coefficient of nonwoven composite geotextile (one cl... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
