Safety Helmet Anti-static Tester / Testing Equipment
Product Introduction:
Safety hat anti-static performance tester according to the new national standard GB/T 2812-2006 "Safety hat test Method", GB/T 2811-2019 "Safety hat" development, used to test the anti-static requirements of safety hats, engineering plastics, helmets and other anti-static performance, high degree of automation, easy to operate, Widely used in safety helmet production enterprises and quality inspection units.
Meet the standard:
GB/T 2812-2006
GB/T 2811-2019
Product Features:
Mechanism for applying electrodes to the test surface or through the volume of the safety helmet or material sample.
Electrodes with specific dimensions (100mm length, 1mm width) made of metal foil, designed for parallel placement.
Low resistance conductive glue or paste used in conjunction with the electrodes to ensure good electrical contact.
Capability to apply selectable DC test voltages (100VDC, 250V, 500V, 1000V).
Wide test resistance range (1×104Ω to 2×1010Ω) to cover the typical range for antistatic materials.
LED digital display for showing the measured resistance value.
Automatic range conversion function for simplified measurement across different resistance levels.
Simple operation panel and large screen display.
Multiple trigger options for initiating the test (internal, manual, external).
High test accuracy with a specified indication error of $pm$1%.
Integrated and portable design.
Main parameters:
Range: 1×10^4Ω —— 2×10^ 10ω
Indication error: ±1%
Test voltage: 100VDC, 250V, 500V, 1000V optional
Electrode length: 100mm±1mm, width: 1mm±0.1mm, the material is metal foil, the electrodes are placed parallel
Trigger: internal trigger, manual trigger, external trigger
Resistance value of conductive glue: <1kΩ
Send product request
Other supplier products
 |
Moisture friction and wear testing machine / Friction Wear Test Machine | Product Introduction: The hydraulic plastic friction and wear testing machine meets the standard "GB/T3960-2016 plastic sliding friction and wear ... |
 |
Plastic Smoke Density Tester ISO 5659 | Standards: GB/T8323.2-2008: Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test ISO 5659-1: Plastics -... |
 |
Chest Drainage Tester / Chest Drainage Testing Machine | The thoracic drainage tester is widely applied in the medical field, mainly used for monitoring and evaluating the performance of thoracic drainage... |
 |
Slip Resistance Tester ASTM F2913 | Introduction Slips and trips are the most common cause of major injuries at work and can happen almost anywhere-broken bones and other serious inj... |
 |
Thermal - Cold Cycle Testing Machine / Hot and Cold Thermal Cycling Testers | Standard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber). Adaptive Certification: ... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
