Helmet UV Pretreatment Box Tester / Helmet UV pretreatment box
Product Introduction
Helmet ultraviolet pretreatment box is used for helmet ultraviolet irradiation pretreatment, according to the new national standard GB/T 2812-2006 "Helmet test method", GB/T 2811-2019 "helmet" development, widely used in special labor protection equipment supervision and inspection station, building science research institute, construction engineering inspection station.
Standards
EN, ISO, ASTM, SATRA, AATCC, JIS, BS, DIN, GB,
Product Features
UV irradiation chamber or enclosure designed to contain safety helmets during exposure.
Specific ultraviolet radiation source (450W high pressure short pulse xenon lamp) designed to emit UV radiation that simulates the spectrum of sunlight.
Cooling method (air-cooled) to manage the heat generated by the UV lamp, maintaining a controlled temperature environment within the chamber (although specific temperature control parameters are not listed).
Internal rack or fixture system capable of holding multiple helmets (from 1 to 14) in position for uniform UV exposure.
Timer with a wide range (0-999 hours) to control the duration of the UV irradiation pretreatment.
Robust construction suitable for laboratory use and the specific environmental conditions required for UV aging.
Safety features (implied) to prevent operators from being exposed to harmful UV radiation during operation.
Main parameters
1. ultraviolet radiation source: 450W high pressure short pulse xenon lamp
2. Cooling method: air-cooled
3. timing range: 0-999 hours
4. the number of pretreatment helmets: 1--14
Send product request
Other supplier products
 |
Ross Flex Tester | Ross Bending Machine | Whole Sole ROSS Flexing Tester GT-KB05D To determine right angle flexing risistance for whole sole of rubber, PU, PVC, TPR foam and other materials... |
 |
Friction and wear testing machine - Friction / Wear Mechanical Testing Equipment | Standards ASTM G99-04 ASTM G77-16 ISO 9352:1995 GB/T 12444-2006 GB/T 12607-2007 GB/T 1865-2009 Application field Petrochemical: Used to ass... |
 |
EN sole bending tester SATRA TM161 | Product Introduction: The EN sole bending tester is used for 90 degree bending test of the sole of rubber, EVA and other zigzag shoes to detect it... |
 |
Catheter Flow Meter / Catheter Flow Equipment | Standards GB/T 15812.1 - 2005 Non - Vascular Intravascular Catheters - Part 1: General Performance Test Methods YY 0285.1 - 2017 Disposable Steri... |
 |
Dynamic footwear water penetration tester / SATRA TM 230 | Application: Dynamic Footwear Water Resistance Tester is designed to determine the dynamic water resistance of all types of shoes. Principle： Th... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
