Safety Footwear Electrical Hazard Tester ISO 8782
Introduction
The safety shoe voltage resistance tester is mainly used to test the voltage resistance of safety shoes under specified conditions, including the measurement of ground voltage, voltage resistance time and other parameters. Through the test of the equipment, the electrical insulation performance of the safety shoes can be effectively evaluated, so as to judge whether it meets the requirements of national standards. This is of great significance to the protection of workers' personal safety.
Standard
GB12011. ISO 8782-1. GB20991-2007. IS2.344:2004. ANSI-241 and CSA-Z195
Product Advantages
Measures Critical Safety Property: Quantifies the voltage resistance (dielectric strength) of safety footwear, which is paramount for protecting workers from electrical hazards.
Standard Compliant: Designed to meet numerous relevant national and international standards (GB 12011. ANSI Z41. CSA Z195. GB 20991. etc.) specifically for electrical hazard safety footwear testing.
Provides Objective Evaluation: Offers a quantitative assessment of the shoe's electrical insulation performance.
Ensures Compliance: Helps verify that safety shoes meet the stringent voltage resistance requirements outlined in safety standards.
Automated Control (PLC): Utilizes a PLC system for automated control of the test process, enhancing consistency and ease of use.
Configurable Test Parameters: Allows selection of different output voltages and adjustment of test time to meet various standard requirements.
User-Friendly Interface: Features a touch screen for easy operation and viewing of test results.
Technical parameters
Control system: PLC (Programmable logic controller) is usually used to realize automatic control and test process.
Input voltage: generally AC220V, in line with the requirements of conventional power supply.
Output voltage: can be customized according to test requirements, common output voltage including AC6KV, AC20KV, AC30KV and so on.
Capacity: Generally 0.5KVA, to ensure stable operation of the equipment during the test.
Test frequency/time: The test frequency is usually 60Hz, and the test time is generally 1 minute or set according to standard requirements.
Touch screen: 7-inch color touch screen, support English and Chinese switching, easy to op
Send product request
Other supplier products
 |
Schopper Abrasion Tester | Standards DIN 53863. Part 2: Abrasion test methods for textile fabrics (rotary abrasion test). GME Standard 60345 & GMW Standard 3283: Indust... |
 |
Taber Abrasion Tester (Double-Head) | Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347 (glass/plastics) ASTM Standards: ASTM D1044 (transparent plas... |
 |
Geosynthetic direct shear drawing friction tester 丨Geotextile Test Machine | The friction characteristics of the interface of sand/geotextile were determined by testing the contact surface of standard sand/geotextile. This i... |
 |
MARK-II Slip Resistance Tester ASTM F1677 | Product Introduction: Paste the cut sample on the test fixture of the portable MARK-II anti-slip testing machine, put down the weight of the rotat... |
 |
Universal Friction Wear Tester - High Precision Friction & Wear Testing Machine | Theuniversal wear and abrasion resistance testeris used to test wear and abrasion resistance of fabrics for apparel, shoes, upholstery, automotive,... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
