3D Geophysical Instrument
Product Introduction:
The 3D Formation Tester measures layers of paper, fiberglass, cardboard, paper towels and towels, and many other sheetlike materials. In addition to measuring the formation index, STD can accurately measure defects and flocculants inside the sheet, as well as low density bags, base weight and internal standard deviation. Unlike camera systems, our device uses a laser-type focused beam to accurately measure the optical density of each pixel on the wafer.
Test all grades of paper: bond paper, lining paper, recycled paper, copy paper, coated paper, colored paper or any other grade of paper. In one test, the STD Formation tester scanned a large area of 320cm2 (16cm x 20cm)， with each pixel measured independently.
No other benchtop formation tester can match this scanning area because the camera system's scanning range is limited to an area of approximately 1 "x1" and there are light reflection issues. The STD formation analyzer uses an independent pixel scanning method to avoid the light scattering problems that occur in all camera systems. We also include a unique feature that allows users to change the optical sensitivity from a low setting to an ultra-high setting, allowing you to filter out less important floc and sheet defects.
In addition to transmission analysis, we offer a suite of optional surface scanning optics to characterize your sheet surface. Comparing steel wire and felt surfaces is easy and reliable.
We use the latest "high resolution" technology to double the scan resolution. Today's high-resolution scans have unparalleled resolution and include up to 128 different sizes of flocs.
Product Advantages:
Advanced Formation Analysis: Provides detailed and accurate measurement of formation index, internal defects, flocculants, and density variations.
High-Resolution Laser Scanning: Utilizes a laser beam for precise, independent pixel measurement, avoiding the limitations of camera systems like light scattering and limited scanning area.
Large Scanning Area: Offers a significantly larger scanning area (320 cm²) compared to typical benchtop camera-based testers, allowing for more representative analysis.
Quantitative Defect Measurement: Capable of accurately measuring and quantifying defects and flocculants within the sheet.
Versatile Material Compatibility: Suitable for a wide range of sheet materials, including various types of paper, board, fiberglass, and textiles.
Adjustable Optical Sensitivity: Allows users to tailor the measurement sensitivity to focus on specific features or types of defects.
High Floc Characterization: Capable of analyzing a large number of different floc sizes (up to 128).
Optional Surface Analysis: Can be equipped with optional optics for analyzing the surface characteristics of the material.
Send product request
Other supplier products
 |
Shoelace Abrasion Tester / SATRA TM93 / QB/T2226 | Standards SATRA TM93、DIN-4843、QB/T2226、SATRA TM154 Principle Let shoelace cross the eyelet clamped on the fiber board, make the shoelace and eye... |
 |
High Acceleration Shock Test System / Shock Test Machine | Applications: The size of the impact test bench is small, and the bench structure is carefully designed after finite element optimization analysis... |
 |
Geotextile equivalent aperture tester (wet sieve method)丨Geotextile Test Machine | Scope of application: The equivalent pore diameter of geotextile and its related products was determined by wet screen method. The geotextile samp... |
 |
Shoe Abrasion Tester QB/T4329-2012 | Product Introduction: The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press ... |
 |
Footwear Cold Insulation Tester EN ISO 20344 / DIN 53351 | Product Introduction Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other test... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
