Chemical Protective Robotic Manikin Clothing Testing Equipment
Product Introduction
TheIndividual Soldier system was commissioned by Defence Research and Development Canada. The second version of the mannequin system was manufactured and commissioned according to the requirements of DST Group Australia. The system consists of a mannequin and an upper body head for testing chemical and biological protective clothing and headgear.
A mannequin is a full-size, articulated, carbon-composite body form that produces accurate anthropometric data. It is lightweight, chemically resistant and capable of performing a range of specified motion protocols. The only means of support were the hands, face and feet, which were tied to the foot boards.
The mannequin is mounted in an external drive frame. The foot drive frame supports external actuators and provides 10 axes of motion. Two lightweight actuators are installed inside the mannequin to generate sympathetic head movement. The system can perform a test sequence of up to six hours in a chemically harsh environment, consisting of any combination of 10 pre-programmed actions.
Also included in the mannequin system is an interchangeable carbon composite upper body head form, designed as a portable stand-alone system for smaller test chambers and temporary environmental analysis tents, which has the same exact dimensions as the mannequin and can be interchanged directly in the drive frame. This upper body form of the head is supported by the base of the head rather than the face. The system provides users with fully computer-controlled head joints that can be combined with arm movements driven by the frame.
Both the upper body and the mannequin have soft, chemical-resistant elastomer skin that covers the entire head, neck, wrists, and waist of the mannequin. This material was developed by i-bodi specifically for this application. In addition, according to the test requirements, low-cost, high-flexibility disposable silicone leather has been developed as an alternative. The house dosimeter holder in the form of a mannequin and upper body head collects the necessary data to evaluate the integrity of the test garment.
Standards
YY/T 0316-2016
GB/Z 42217-2022
GB/T 16294-2010
Product Advantages
Designed for Military CB Testing: Specifically developed and commissioned by leading defense R&D organizations for the rigorous testing of military CB protective gear.
High Chemical Resistance: Constructed with chemically resistant materials suitable for operation in harsh chemical environments.
Realistic Movement Simulation: Full-size, articulated body with 10 axes of motion and internal actuators can simulate a wide range of realistic infantry movements and activities.
Long Duration Testing: Capable of performing test sequences lasting up to six hours in challenging environments.
Versatile Configuration: Includes both a full-size mannequin and an interchangeable, portable upper body head form for different testing needs and chamber sizes.
Accurate Anthropometry: Produces accurate anthropometric data, ensuring protective gear fits and performs realistically on the manikin.
Integrated Data Collection: Features a dosimeter holder for collecting crucial data on garment integrity and agent penetration.
Sophisticated Control: Fully computer-controlled system allows for precise and repeatable execution of complex motion protocols.
Durable and Realistic Skin: Features custom-developed soft, chemical-resistant elastomer skin.
Technical Parameters
Width range: 1-5cm;
Stretch range: 30%-70%;
Detection linearity: 0.8-1;
Detection limit: 0.01%-0.1%;
Fatigue life: no less than 200.000 cycles.
Send product request
Other supplier products
 |
Slip Resistance Tester ASTM F2913 | Introduction Slips and trips are the most common cause of major injuries at work and can happen almost anywhere-broken bones and other serious inj... |
 |
Geosynthetic Clogging Tester丨Geotextile Test Machine | Scope of application: The method of gradient ratio is used to measure the permeability coefficient and permeability ratio of soil and geotextile s... |
 |
Midsole Fibreboard Bending Test Machine - STD G664 | Product Introduction: G664 mid-sole fiberboard zigzag testing machine Test leather shoes and casual shoes, walking shoes and other travel shoes, m... |
 |
Temperature and Humidity Test Chamber / Temperature & Humidity Tester | Features and Benefits 1.Wide Temperature Range：Selectable from -20°C, -40°C, -60°C, or -70°C up to +150°C, with a high-efficie... |
 |
Scott Flex Tester JIS L1096 | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance of leather, leather and woven materials. One end o... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
