Fabric Drying Tester
Product Introduction:
This device is developed for the automatic test of "dryness" method A and method B specified in JIS L 1096 (Fabric test method for fabrics and woven fabrics)。 Previously, the test of method A took a lot of time and was very troublesome. By automating it, only the sample cloth could be suspended on the device to automatically measure 3 samples at the same time, and the measurement data could be stored on the computer at any time. In addition, if the test time setting mode or dry recognition mode is set, the device will automatically stop when the selected mode is over, and the test end alarm sound will be issued. Each piece of data is saved in a data file, and the data can be viewed or edited on other computers. The automatic cloth dryness measuring device not only measures the well-known "dryness after washing", but also tests how long the sweat evaporates and disperses after penetrating the fabric and woven fabric, and is widely used. It is also used in the research and development of materials with the aim of retaining water and moisturizing properties, as opposed to "quick drying properties."
Standard：
AATCC 201
Features:
1. In a fully automatic device, just hang the sample cloth for fully automatic measurement.
2. Can measure 3 samples at the same time.
3. Each measurement data is displayed on the monitor with graphics or numerical values, and printed by color printer.
4. You can choose the test time, set the mode and dry recognition mode.
5. It can be controlled and processed by computer Window.
Equipment composition:
1. Measuring department and 1 automatic sample moving equipment
2. Control/data processing equipment (Windows)， 1 color printer
Data display content:
(1) Method A or Method B
(2)Method A
The measured value represents sample No. (1-3)， elapsed time, weight, time setting mode or drying recognition mode, etc
The chart shows sample No. (1 —— 3)， X-axis/elapsed time, Y-axis/weight change, etc
Method B
The measured value represents the cloth weight of sample No. (1 —— 3) before water absorption, the cloth weight of sample 10 minutes after water absorption, and the average moisture weight of sample No. 1-3
Specification parameters:
Model: IT-ACD, IT-ACDS (Special for measuring trace moisture)
Sample size: 1——3 (the number can be changed according to demand)
Test standard: JIS L1096 (Fabric and woven fabric test method) dryness and evaporation A method, B method
Weighing and minimum sensitivity (including air bag weight) : 2000 g/ 0.01 g (10mg) 600g/ 0.001g (1mg)
Test interval: 5min/ sample
Sample fabric size: 40x40cm for method A and 15x15cm for method B
Automatic mode: Time setting mode 1 —— 48 hours (arbitrarily set in 1 hour)
Drying recognition Mode IT-ACD 50mg, 100-1000mg (set to 100mg unit)
IT-ACDS 1Mg-10mg (set in 1mg unit)
15mg, 20mg - 100mg (in 10mg units)
Control and data processing devices: Windows
Recording method: color printer
Options: Special windshield (front part transparent acrylic door open and closed, top/sides/back non-wove
Send product request
Other supplier products
 |
Geosynthetics Bursting Strength Tester ASTM D | Meet the standard: ASTM D3786-2008.SL/T .etc Scope of application: It is used to determine the bursting strength of geotextiles, geomembranes an... |
 |
Dynamic mechanical torsional braid analyzer | Product Introduction： Dynamic mechanical torsional braid analysis apparatus adopts computer-controlled digital technology.The test principle of th... |
 |
Catheter Balloon Inflation Diameter Tester | Standards ISO5367. YY0337.1 - 2002. GB/T15812.1 - 2005. YY 0321.1 - 2009. YY/T 0321.2 - 2021. YY 0321.3 - 2009. and YY0285.6. etc. Main Uses The... |
 |
Large diameter blasting test machine ISO 1167 | Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurable... |
 |
Electro-hydraulic servo dynamic fatigue testing machine | Product Introduction: Electro-hydraulic servo dynamic and static fatigue testing machine (hereinafter referred to as the test machine) is mainly u... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
