Film impact tester ISO 6272
Product Introduction
The film impact testing machine, through the hemispherical punch at a certain speed, impacts and passes through the film sample, measures the energy consumed by the punch, and evaluates the anti-pendulum impact energy of the film sample.
The sample to be measured is placed in the middle of two splints to clamp, and the pendulum is adjusted by counterweight to form enough mechanical energy to impact the surface of the sample to be measured during the impact process to break down or not break down the sample to be measured. The energy borne by the sample to be measured is the loss part of the total mechanical energy formed by the pendulum during the impact process, and is read out on the dial through the pointer.
Standards
ASTMD3420-2014、GB8809-2015、GB/T 20624.1—2006/ISO 6272-1:2002、ASTM D2794—2019;
Performance parameters
- Full range of dial: 3J/(30cm.kgf)
- Maximum impact energy: 3J
- Hammer diameter: Φ25.4mm: suitable for test specimens with diameter of medium 50-60 (Class A test in the standard); Φ19mm: Suitable for testing specimens with a diameter of 89 (Class B test in the standard)
- Reading dial minimum scale value: 0.020J/ grid (0.20cm.kgf)
- Specimen clamp diameter: Φ89mm, Φ60mm
- Swing range: R300mm
- Swing Angle: 90°
Send product request
Other supplier products
 |
Bally Waterproofness Tester - Leather and Footwear | Product Information: Bally Waterproofness Tester is to test materials like coated leather, leather dynamic water penetration resistance ability. T... |
 |
Sweating Thermal Manikin ASTM F 2371 | Standards: ASTM F 2371 – Standard Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Maniki... |
 |
Sweating Thermal Manikin | Standards compliant ISO 15831：2004(E) Clothing-Physiological effects -Measurement of ASTM F 1291-04Standard Test Method for Measuring the Thermal... |
 |
Safety Helmet Anti-static Tester / Testing Equipment | Product Introduction: Safety hat anti-static performance tester according to the new national standard GB/T 2812-2006 "Safety hat test Method", GB... |
 |
Geosynthetic creep tester 丨Geotextile Test Machine | Scope of application: STD DW1290 series geosynthetics creep test system is used to determine the tensile creep properties of geosynthetics product... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
