Falling ball rebound instrument / Ball Rebound Tester
Product Introduction:
The falling ball rebound instrument is designed and manufactured according to GB/T6670-2008 or ISO8307 or ASMD3574. It is suitable for determining the falling ball rebound property of soft polyurethane foam. The instrument calculates the maximum rebound height of the steel ball and the percentage of the falling height of the steel ball by the steel ball with a given diameter and quality falling freely on the foam sample at a specified height, and the rebound rate represents the resilience of the foam.
Performance parameters:
- Drop ball rebound accuracy: relative accuracy is less than 1.5%
- Steel ball falling height (mm) : 460±0.5%(GB/T6670-97)
-500 ±0.5%(ASTMD3574 and ISO8307)
- Plastic pipe diameter: 40±4mm
- Ball diameter: Φ=16±0.5
- Steel ball mass: 16.7±1.5g
- Measuring range: 10%——100%
- Reading mode: color crystal display
- Sample size: 100×100×50mm
Send product request
Other supplier products
 |
AT1000 Abrasion Resistance Tester | Device description The at1000 wear tester has been used around the world since 1970 and is ideal for comparison and quality control of platelet-sh... |
 |
Elastic Tape Fatigue Testing Machine / Elastic Fatigue Testing Machine | Product Introduction: This instrument is used to test the elasticity of elastic belt after reciprocating movement. Standards: SATRA TM103 Appli... |
 |
UV Accelerated Weathering Tester | Product description: UV accelerated weathering test machine ,which as a kind of environment test chamber ,can be simulated by the harm the sun, ra... |
 |
Bentonite waterproof blanket permeability tester丨Geotextile Test Machine | Scope of application: Used to determine the permeability coefficient of bentonite waterproof blanket under specified pressure and time conditions.... |
 |
Ross Flex Tester / Ross Flexing Apparatus / Flex Tester | Product Introduction: The ROSS zigzag resistance tester installed the sole strip test piece on the ROSS zigzag test machine, so that the cut is di... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
